Board logo

self cancelling indicator unit
evo97 - 4/7/18 at 12:18 PM

as above anything available ideally the westfield unit


Charlie_Zetec - 4/7/18 at 01:45 PM

THIS is the sort of thing you're looking for, for use with non-latching push-button switches.


evo97 - 4/7/18 at 02:48 PM

Yep don’t want to pay £100 tho 👍


Bunje - 4/7/18 at 03:33 PM

http://blinkstop.co.uk/shop/index.php?route=common/home
try here the guy that makes them is a member on the wscc forum and its a top quality bit of kit i have his wirless steering wheel package


evo97 - 4/7/18 at 03:37 PM

Yep I have seen them but my soldering skills are shocking so will have to go for a built unit at £65 then a new non latching switch which is close to what Westfield sell the complete kit at £85.

Was hoping there was a used one around 👍


peter030371 - 4/7/18 at 08:45 PM

You can get the Signal Dynamics on eBay for just over £60 delivered. Easy to use and works OK for me


Dave Bailey - 4/7/18 at 09:04 PM

Is it a Sierra steering column? Can you use the original switch and mechanical cancel with the plastic collar? This is how I have done it...

Dave B


evo97 - 5/7/18 at 10:45 AM

Currently using a toggle switch on dashboard


kingster996 - 5/7/18 at 09:40 PM

I have one you can have for £30 plus post. Cost me more a while back, but decided to fit a blinkstop instead. So it’s never been fitted, basically as new.

I’ll try and find details of it for you but it’s an American item for a motorcycle.


kingster996 - 5/7/18 at 09:53 PM

It’s one of these http://www.squaredeals-ltd.co.uk/kisantech-self-cancelling-flasher-relay-signal-minder-sm-3-mitsuba-plug-fitting-1290-p.asp and I have a connector to fit the plug shown.

£80 new, so mine is a bargain