Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Global GT Light progress
Rupturedduck

posted on 27/4/13 at 07:08 PM Reply With Quote
Global GT Light progress

My wife and I bought a Global GT Light about 2 years ago for Sprints and Hillclimbs.

Here it is as we bought it:



Previously we had used an Alfasud Ti and Pulsar 931 kitcar. The Global is by far the most fun and the quickest. We've enjoyed a few class wins (inc two a Brighton Speed Trials) and a class record, but think there is a lot more to be had out of the car yet.

Currently looks like this:



I watch the work many of you guys carry out on your Locosts and other projects with great envy of your skills and ability. Over time I will be carrying out minor development work and your comments and constructive criticism is most welcome.

Latest work is repairing the damaged splitter and fitting some tasty carbon fibre dive planes/canards to replace the ally ones I made last year. The new ones came from forum member Carbonman (www.carboncopiesltd.co.uk) and were made to measure for the front of the Global GT Light. The layup is perfect, and weigh in well under half the weight of the old pair. Warren has been a huge help with plenty of advice about a future project (new lightweight floor), as well as making sure we get the best from the work he does. Notice, there are little up flicks on the outside edge of the canards, one of his ideas.


View User's Profile View All Posts By User U2U Member
MsD

posted on 27/4/13 at 07:31 PM Reply With Quote
Now that looks

Any more pictures of it in its current state?

Mark.

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 27/4/13 at 08:03 PM Reply With Quote
You don't have to ask twice!








View User's Profile View All Posts By User U2U Member
daniel mason

posted on 27/4/13 at 08:07 PM Reply With Quote
very nice car!






View User's Profile E-Mail User View All Posts By User U2U Member
T66

posted on 27/4/13 at 08:16 PM Reply With Quote
RupDuk - Looking good....






View User's Profile View All Posts By User U2U Member
Carbonman

posted on 27/4/13 at 08:27 PM Reply With Quote
Happy to help. Hope you see some improvement once you get them fitted Let me know how the Intake Duct goes and once Stoneleigh is out of the way we can have a look at improving that Airbox





Carbon Copies Ltd

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User View All Posts By User U2U Member
Rupturedduck

posted on 27/4/13 at 08:51 PM Reply With Quote
quote:
Originally posted by T66
RupDuk - Looking good....


Cheers TuttiFrutti ;-)

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 27/4/13 at 08:53 PM Reply With Quote
quote:
Originally posted by Carbonman
Happy to help. Hope you see some improvement once you get them fitted Let me know how the Intake Duct goes and once Stoneleigh is out of the way we can have a look at improving that Airbox


Cheers Warren, I'm sure they will. Been looking at the Intake Duct (I was keeping that one a secret!) and think that will work best when we get the air box done.

Have fun at Stoneleigh!

View User's Profile View All Posts By User U2U Member
snapper

posted on 28/4/13 at 06:17 AM Reply With Quote
In the picture taken from high vantage point which person is your wife
The one in black with the baseball hat or the one with ginger hair?





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 28/4/13 at 06:28 AM Reply With Quote
quote:
Originally posted by snapper
In the picture taken from high vantage point which person is your wife
The one in black with the baseball hat or the one with ginger hair?


Haha! Love it!

On the right is former owner of the black/gold Global in the same picture, I'm on the left in the hat. My wife took the picture. Unfortunately, she won't be competing again for a while for health reasons.

View User's Profile View All Posts By User U2U Member
wee beastie

posted on 28/4/13 at 08:38 AM Reply With Quote
quote:
Originally posted by snapper
In the picture taken from high vantage point which person is your wife
The one in black with the baseball hat or the one with ginger hair?


I'll have you know we're very happy together And it's not ginger, it's auburn





They aren't cars, they are incline assault vehicles!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Rphelan

posted on 30/4/13 at 10:00 AM Reply With Quote
WANTED - Global GT for sale - full car or project

Hi All
Lovely looking cars....saw these cars race recently in Mondello in Ireland.......I'm looking to get one...a full car ready to go or even a project car...work on it...chassis only.....

Dose anyone on here know of any Global GT for sale?
Please advise??

Ray

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 30/4/13 at 06:00 PM Reply With Quote
They crop up now and again on the usual sites (PH, MotorsportAds, etc) but price and quality does vary. If you want one of the Irish 600cc ones, try ABR Sports perhaps?





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 1/5/13 at 05:02 PM Reply With Quote
The canards from Carbonman have now been fitted and I'm pleased with the results. A few minor repairs to the splitter and front panel completed. Almost ready for next outing at Gurston Down at the end of the month.









It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 28/5/13 at 02:55 PM Reply With Quote
A good time was had at Gurston Down last weekend. The Global behaved pretty well, with the new cable gear shift providing better feel for the change, but on a couple of runs I ended up with neutral on the upshift, which I've traced to a small movement on the bracket at the engine end which has already been removed for bracing.

The new canards from Carbon Copies Ltd helped dial out understeer, along with ARB adjustments.

Looking forward to Abingdon CARnival in under two weeks time....







[Edited on 28/5/13 by Rupturedduck]





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
CNHSS1

posted on 28/5/13 at 04:46 PM Reply With Quote
looks nice sat between old skool Mallock and Grahams cutting edge Libre LM.





"Racing is life, everything else, before or after, is just waiting"---Steve McQueen

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 28/5/13 at 05:23 PM Reply With Quote
Graham's machine is quite something to behold. The aero is beautiful. There was two of them in Sport Libre this time out at Gurston

The Mallock is John Forsythe's weapon, he was a good competitor to be next to in the paddock.

[Edited on 28/5/13 by Rupturedduck]





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
CNHSS1

posted on 28/5/13 at 05:38 PM Reply With Quote
Johns been around for years.

I know Graham well, and have seen the car evolve. He was a little worried that the turbo motor would take some getting used to, but hes soon got to grips, and is likely to be more powerful and reliable than his 1600 busa. In fact, i think there will be a shift towards std-ish capacity but blown or turb'd bike engines in the near future. With decent management (Grahams runs MoTec), they can be tamed and allow differing boost and torque curves in different gears as well as rpm limits per gear, more flexible than a peaky 1600 full race busa imho





"Racing is life, everything else, before or after, is just waiting"---Steve McQueen

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 28/5/13 at 05:51 PM Reply With Quote
Oh, to have the budget to be able to work at that level.





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 12/6/13 at 05:51 PM Reply With Quote
2nd in class at Abingdon CARnival Sprint, but a country mile from the winner. I'm embarking on a series of updates including removing the massive fuel tank, and replacing it with a 5l fuel cell where the fire extinguisher currently is.

With the fuel tank removed, I can chop the lower part of the chassis that houses it and fit a full diffuser. Rear brakes aren't subject to heavy use, so toying with idea of removing the discs and calipers, and fitting a kart disc and caliper on the axle in a central location.

Plotting a new wing, smaller dash. There is an intake and duct which will be fitted this week channeling a nice air flow directly to thenairbox.

Lots to do, now where did I put that angle grinder?





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member
Rupturedduck

posted on 29/11/13 at 02:32 PM Reply With Quote
Now for sale....

Click here for thread for Global GT Light for sale





It's not a car. It's an incline assault vehicle.

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.