Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fia harness and Iva
marmot0

posted on 10/8/14 at 11:28 AM Reply With Quote
Fia harness and Iva

Hi, I know fia harness should pass Iva but do they need to be in date.
Thanks

View User's Profile View All Posts By User U2U Member
adithorp

posted on 10/8/14 at 11:44 AM Reply With Quote
No, they don't take the date into account.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
Kdempsie

posted on 10/8/14 at 11:53 AM Reply With Quote
I always thought that harnesses needed to be EC type approved to suit IVA? If they are FIA and EC then that was OK but not just FIA.

Have I misunderstood that?

View User's Profile View All Posts By User U2U Member
marmot0

posted on 10/8/14 at 11:53 AM Reply With Quote
Great. Kit car magazine had a feature on belts and Iva stating they would fail if out if date, thought this was odd as it is not mentioned I the manual. Cheers
View User's Profile View All Posts By User U2U Member
kingster996

posted on 10/8/14 at 12:44 PM Reply With Quote
I had a look at the manual when I bought my out of date Willans harnesses. The way I read it was that the examiner had to be satisfied that they were fit for purpose and the easiest way to do this was to use nice new ones that had the latest approved marks. However I reckon a set of race harnesses will certainly be up to the job of being fit for purpose as long as they are in good condition.

I could be talking tosh of course!

[Edited on 10/8/14 by kingster996]






I used to be indecisive, but now I'm not so sure

View User's Profile View All Posts By User U2U Member
theconrodkid

posted on 10/8/14 at 01:45 PM Reply With Quote
AFAIK they also need to be able to be un-done with one hand,ie the red push button type release and not the aero type.





who cares who wins
pass the pork pies

View User's Profile E-Mail User View All Posts By User U2U Member
SteveWallace

posted on 10/8/14 at 01:50 PM Reply With Quote
quote:
Originally posted by Kdempsie
I always thought that harnesses needed to be EC type approved to suit IVA? If they are FIA and EC then that was OK but not just FIA.

Have I misunderstood that?


Prima Motorsport have something on their website that says that after lobbying for ages, in 2010 for VOSA accepted FIA approval labels in IVA tests.

View User's Profile View All Posts By User U2U Member
sdh2903

posted on 10/8/14 at 01:52 PM Reply With Quote
quote:
Originally posted by theconrodkid
AFAIK they also need to be able to be un-done with one hand,ie the red push button type release and not the aero type.


Steve beat me too it!!

Not true. Rotating aircraft buckles are perfectly acceptable.

As long as the harness is Fia approved it's fine. Dating is only for racing. I did see an article somewhere possibly on the prima Motorsport site (who make the titon harnesses) explaining the regs with respect to IVA.

Another myth is clip in harnesses won't pass, again not true. As long as you protect any edges and put a split pin through the catch they will be perfectly fine for IVA.

[Edited on 10/8/14 by sdh2903]

View User's Profile View All Posts By User U2U Member
The Black Flash

posted on 11/8/14 at 09:35 PM Reply With Quote
quote:
Originally posted by sdh2903
quote:
Originally posted by theconrodkid
AFAIK they also need to be able to be un-done with one hand,ie the red push button type release and not the aero type.


Steve beat me too it!!

Not true. Rotating aircraft buckles are perfectly acceptable.

As long as the harness is Fia approved it's fine. Dating is only for racing. I did see an article somewhere possibly on the prima Motorsport site (who make the titon harnesses) explaining the regs with respect to IVA.

Another myth is clip in harnesses won't pass, again not true. As long as you protect any edges and put a split pin through the catch they will be perfectly fine for IVA.

[Edited on 10/8/14 by sdh2903]


SDH is 100% correct. It's what the manual says, also I passed with clip, aero buckled, FIA marked harnesses.

View User's Profile Visit User's Homepage View All Posts By User U2U Member
sg_frost
Builder






Posts 104
Registered 6/11/02
Member Is Offline

Photo Archive Go!
Building: Haynes roaster in college with students, gulp!

posted on 11/9/14 at 02:13 PM Reply With Quote
GRRRR.

Bought some cheap FIA second hand harnesses with aircraft buckles (learnt they were better for getting out of rally car in a hurry when sick) but heard they were not passable so I sold them on for the same price.
I have got my hands on a set of buckle type now (TRS) that have an E mark on them but upon checking the IVA manual it says.
"Note 1: A British Standard BS3254 Part 1 1988 or evidence of FIA 8853-98 approval for a harness belt is acceptable"
Will my E marked harnesses pass, I know my old ones would have.
Getting lost with this issue!!

View User's Profile E-Mail User View All Posts By User U2U Member
alfas

posted on 6/11/14 at 08:52 PM Reply With Quote
aircraft buckles and FIA? are yo sure?

FIA and E-marked: no way!!

IVA = E-marked..i guess so..

View User's Profile View All Posts By User U2U Member
blakep82

posted on 6/11/14 at 08:57 PM Reply With Quote
quote:
Originally posted by alfas
aircraft buckles and FIA? are yo sure?

FIA and E-marked: no way!!

IVA = E-marked..i guess so..


What? Lol





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.