Thought i would beat Bob to it this month!! Sorry Bob
Hopefully i'll actually have my car there!!! Fingers Crossed
Andy
your keen,brecky on you me thinks
HA! no chance.... i have just spent all my money on a new fuel tank!!!!
Andy the skint one!!
quote:
Originally posted by theconrodkid
your keen,brecky on you me thinks
quote:
Originally posted by donut
HA! no chance.... i have just spent all my money on a new fuel tank!!!!
Andy the skint one!!
Right then,so its march 7th
Are you girls sure about this, i mean you dont want to change the date again because the real boss in your house want to go shopping
I'll put it in my diary then shall i.
cheers
and dont let me go without one of them fishy plastic trays this time
and dont let me go without one of them fishy plastic trays this time
Not sure Bob... better just pencil it in... cos you never know with this lot
ill be there,might even be at waltons mountain on the 22nd for some extra grease
Well I got to Feb meet and put about120 miles on the new car and pleased to report nothing fell off. Alas arrived after most of you had gone. But it
was good to see some of the regular posters in the flesh so to speak.
No scrub that last comment - the thought is too horrific!
See you all in March!!
How do you get your posting numbers so high Conrod!!!
ask steve(they are all of importance not just to fill space)
Yep , should be there !!
Jason
Thats Ok then Conrod long as your not posting , twatish posts like THIS one!!! !
wouldnt do that
would i do ANYTHING like that either
Or me!!!
i'll be there, i have an anouncement to make, maybe later...
Ned.
Either your moving up north?
or
Giving up with the build ?
£5 says it's a baby!! (a real one)
I never knew Ned had a womb!!
Andy
Announcement:
I think I'm going to go de-dion [shock horror] after all those pro-irs discussions I've read a book on suspension and the accuracy of
geometry and decided irs is just too much hastle.
Ned.
Me? giveup?
ben, i'll slap you with a kipper when i next see you.
Ned.
[Edited on 9/2/04 by ned]
I thought you where going to admit that you where one of these Poofter's that Bob's talking about!!
But seriously!!!!, sounds like a sensible idea you,ve at least got a good chance of the rear wheels pointing the same way!!!
If I wasn't so lazy I'd do that mod myself........
I thought you where going to admit that you where one of these Poofter's that Bob's talking about!!
But seriously!!!!, sounds like a sensible idea you,ve at least got a good chance of the rear wheels pointing the same way!!!
If I wasn't so lazy I'd do that mod myself........
Oh no ,I've done a Conrod and got two posts the same!!, by accident!!
[Edited on 9/2/04 by Surrey Dave]
Its the website... Chris W has explained it. It posts the first time, but hangs so you hit refresh and it posts again
quote:
Originally posted by ned
Me? giveup?
ben, i'll slap you with a kipper when i next see you.
Ned.
[Edited on 9/2/04 by ned]
Is everyone still up for it then ???
Donut dont forget that tank
I'm there, for sure !!
i won't be able to make april's meet as i''l be at rockingham.
Ned.
anyone goin to brooklands got any trim clips,the plastic thing that holds door cards on?if ya do can you bring one
Yes Ben the tank is in the garage ready to be taken to Newlands, don't forget me free cup of tea!!
Andy
Hope it's not the one you showed me
It was comming apart at the seams, and couldn't have been repaired !!
Jason
Hope not either if it is... i'll still have it just only be worth 1/2 a tea
back to the top
Seeya there folks.
James
weather looks ok,thermals on,anyone got any trim clips,the ones for door cards???
need a piece of exhaust wrap and some 25x3 strip if anyone has any goin spare
Conrod,
It's not like you ain't got the time- just hammer some bean cans into shape!
James
How much zorst wrap do you need and how long a strip of 25x3 ?
i got a bit of both,and i'm starving
Conrod,
Do you mean 1" x 1/8" flat steel ?
How much do you need?
need some wrap for clutch cable and some strip1"x1/8 for exhaust sheild,about 4 feet should do it
[Edited on 3/3/04 by theconrodkid]
I got zorst wrap no probs,i'll have a look at the scrap metal pile tomorow as i'm back in the garage
k cheers dude
Me and Bob are doing synchronised posting now!!
Sounds a bit nasty doesn't it!!!
Do you need alli or steel?
alli or steel,mmmmmmmmmmm decissions,steel i spose as i can weld it,cheers chaps see ya sundy
I'll have a look ,and see if i've got any tomorrow...........
John
I got nearly 4ft of 25x3mm strip so thats sorted,how much zorst wrap ?
cheers bob,just need a few feet to wrap clutch cable near exhaust
I got a couple of nice stanless tie wraps too,should do the job
I'm coming
Chris
weather looks a bit iffy,ill pick you ap @ 9-00 chris,AND DONT BE LATE!
ETA 09.30 ish then
bit damp round the edges by the time i got home
Dam and i thought everyone got a mention.
at least paul beyer got in there,even if it was for being told to come home before its dark.
Poor show if you ask me.... editting out a thankyou that was well deserved !!!
Good to see so many people there again.
What was it, 15 or more?
Thanks for the accelerator cable- Jason, Bob, Donut!
James