Board logo

Dry verge, which way?
coozer - 23/7/16 at 04:48 PM

Struggling with this one... Going to put some of them placker dry verge bits on the edge of me roof but can't understand which is left hand and which is right hand??

If I'm standing on the ground looking up at the roof is it as simple as left hand ones up the left side and right hand ones down the right??

Need to know as the back is longer than the front has both sides but the front is shorter and only the right side cause the left is attached to next door...

Ta,
Steve


hearbear - 23/7/16 at 06:56 PM

Try this Le ft or right

[Edited on 23/7/16 by hearbear]


van cleef - 23/7/16 at 07:58 PM

Facing the roof left to left and right to the right.....it is as easy as that!

I've never heard of placker units or dry verge but the likes of eternit/Marley, redland, Klober all work like that. With some of the universal dry verge you have to snap bits off to make them work for the left or right hand side.


coozer - 24/7/16 at 09:51 AM

Thanks for that, all clear now