Board logo

newbie questiones
dpavlov - 11/2/07 at 07:42 AM

Thanks guys for all replies! Sorry for big picture. How do you reduce size of picture? Found cortina 3D model, but it has 214.8 mm betveen upper and lower ball joint. Found somewhere else 222 mm. Which is right?

[Edited on 11/2/07 by dpavlov]

cjtheman - 11/2/07 at 08:24 AM

hope this helps you
cheers
colin Rescued attachment cortina_upright.gif
Rescued attachment cortina_upright.gif

rusty nuts - 11/2/07 at 08:34 AM

Doubt if you work in inches? to convert sizes to mm multiply by 25.4 example 1.5" x25.4=38.1mm

JoelP - 11/2/07 at 08:41 AM

quote:
Originally posted by dpavlov
How do you reduce size of picture?


I use microsoft paint. Under the image tab at the top, click stretch/skew, and type in a lower number, is 15 to 50 depending on detail needed. Alternatively, press ctrl W as a shortcut.

dpavlov - 11/2/07 at 09:10 AM

This is what i have.
Found it on lusomotors.com

[Edited on 11/2/07 by dpavlov] Rescued attachment CORTINA UPRIGHT.jpg
Rescued attachment CORTINA UPRIGHT.jpg