Board logo

CBR1000RR oil take off and cooler specs
OliilO - 2/9/21 at 09:15 AM

Does anyone know the thread size on a cbr1000rr oil filter and whether one of the sandwich plates linked below would be suitable?

https://www.demon-tweeks.com/uk/mocal-billet-oil-sandwich-plate-with-two-sender-take-offs-2014464/


Additionally what size of oil cooler is suggested (for a mix of road and track)? I’ve seen 25 row 235mm mentioned in a couple of places.

Thanks,
Oli

[Edited on 2/9/21 by OliilO]


Paul_Arion - 3/9/21 at 01:44 PM

I'm building an AB Performance Arion at the moment - and Andy Bates supplies a 25 row 235mm oil cooler as your own research has suggested.

The Fireblade oil filter has a M20x1.5mm thread - so that version of the oil cooler sandwich plate should suit quite nicely.


OliilO - 3/9/21 at 04:17 PM

Thanks, that’s really useful. Andy would have been my first port of call if he was still there.

Do you know what size lines he recommended?


Paul_Arion - 3/9/21 at 05:08 PM

quote:
Originally posted by OliilO
Thanks, that’s really useful. Andy would have been my first port of call if he was still there.

Do you know what size lines he recommended?


Yes he’s a big loss to the BEC world that’s for sure. He’s over in the Greek Isles now after having had enough of the UK - who can blame him after the past couple of years!

Mine are An-10 - I’ll pop a couple of pictures up


Paul_Arion - 3/9/21 at 05:13 PM

Oil filer sandwich plate
Oil filer sandwich plate

Oil cooler
Oil cooler


OliilO - 5/9/21 at 02:13 PM

Paul, that’s great. Thanks for the help.

If only I could find a low profile airbox now!


Paul_Arion - 6/9/21 at 07:50 PM

quote:
Originally posted by OliilO
Paul, that’s great. Thanks for the help.

If only I could find a low profile airbox now!


No problem at all mate. I guess you’re looking for one like Andy produced? You should still be able to get one from Arion Denmark - I can always measure mine if you need any help with fitment checks.

Arion Denmark