Hello

As above, a simple one really. I've spotted a set of FWD ford alloys (from a Ka) which would suit my Locost well. Its running a Mk2 back axle and uprights. Will these fit OK or would I need spacers?

Cheers

[Edited on 1/8/16 by dome]

I believe the Mk2 escort uses wheels that are around ET19

Not sure about KA's, but most of the newer cars and FWD stuff is at least ET35 (even sierra's are ET35 to 38)
later models tend to be even bigger offsets (my focus wheels are ET52)

so any of these would need some decent hub centric spacers to work for you



[Edited on 1/8/2016 by mcerd1]

Might need spacers as iirc rwd fords have an offset around 20 where as fwd have closer to 35.
Cant remember the exact figures tho.

Good stuff, that's what i thought. If it'll work with spacers then jobs a good un!

Which wheels are you looking at ?

I do remember seeing a stock KA with minilite clones...