Board logo

Ford Sigma/IB5 clutch m/c
johnH20 - 1/12/13 at 08:56 PM

Been searching for a thread on here from J15 builders identifying clutch m/c size but cannot find it. I took a note previously and I think the answer was 0.7 in. Can someone please confirm. TIA.


theprisioner - 2/12/13 at 12:58 PM

I have a 0.75" on a std Ford Sigma concentric slave cylinder.


johnH20 - 2/12/13 at 04:37 PM

Thanks for that, I will try not to loose the note this time. To avoid doubt I will order at once!


Jenko - 3/12/13 at 03:54 PM

Agree with the use of the 0.75