Iv had a bit of a problame with the coils today as I have found out that they are dead
Hope some one can help me ? Dan
Hi all Iv just spoke to cradley Kawasaki .. They have just said you have to use the original key and barrel as there is a security device in the
barrel that can blow the ecu ? Is that true or do they said that so they can charge a fortune .. If so is there a way around it ?
Iv had a bit of a problame with the coils today as I have found out that they are dead
Hope some one can help me ? Dan
You're not having a lot of luck Dan!
Have you put the 100 ohm resistor in the grey wire from ignition switch to ECU? The security device in the original barrel is a 100ohm resistor
Some good advice in this thread http://www.locostbuilders.co.uk/viewthread.php?tid=85055
Follow it until the end, then check the links in the thread.
[Edited on 29-5-13 by 40inches]
[Edited on 29-5-13 by 40inches]
There is one but I don't no if any good as it was already there .. Ill have to strip the wires back and have a look ..
Tell me about it mate it dosnt help when you get the engine of someone who hasn't got a f@ckin clue lol ...
If for any reason it's bypassed dose that mean the ecu is dead ? Please say no lol haha
Dan
No, the ECU will be looking for around 9volts, if it sees 12volts it will sulk 
Sent you a U2U.
What year ZX9 have you got? I just changed over to fuel injection and megasquirt on mine and have a spare 1998 C1 CDI that you can use for testing if
you need it.
Dave
Hi mate Iv got a b3 but I think they all suit ? Ill send you a pic of the connection and cdi if you want to compare if that's ok mate ?
Dan
Send away
What's you email ? As I don't no how to do it on hear ?
Dan
eBay item.. This is the same
171043364660
Dan
Sorry but mine is this one
Kawasaki ZX9R ZX900 C1 C2 98 99 ECU cdi brains chips GOOD | eBay
I have one of those in the garage. Had a B3/4 zx9 in my Indy.
Send me a message if its of use. Perfect working order. Got a full engine sat under a cover as well.
Rich
U2u rb969
Thank you anyways mate .. It good to now there is plenty people out there willing to help 
OMG,! Iv just spoke to some one about the 100 ohm resister ?
They said I need to now what one its is ect with watts ..... Help
quote:
Originally posted by Hopley89
OMG,! Iv just spoke to some one about the 100 ohm resister ?
They said I need to now what one its is ect with watts ..... Help
Thanks rich
We're can I get it from ?
Dan
230899763305 are they the ones ?
Dan
Ebay item ..
quote:
Originally posted by Hopley89
230899763305 are they the ones ?
Dan
You dont need any of it, you can bypass it easy.
quote:
Originally posted by coozer
You dont need any of it, you can bypass it easy.
Yea I think your right 40inches when I spoke Kawasaki they said the cdi needs 9vsif it has 12 it can blow the cdi unit ..
How can you bypass it ? Iv found them in maplins
Dan
Iv just got them from maplin .. 30p each 
I GOT IT GOING WOOOOOOOOOO
quote:
Originally posted by Hopley89
I GOT IT GOING WOOOOOOOOOO
yea the best feeling going when she fired up i was well chuffed mate ... a long process but well worth it
all thanks to you tho 40inches i would never of got it done otherwise