Hopley89
|
| posted on 29/5/13 at 04:41 PM |
|
|
Zx9r ??
Hi all Iv just spoke to cradley Kawasaki .. They have just said you have to use the original key and barrel as there is a security device in the
barrel that can blow the ecu ? Is that true or do they said that so they can charge a fortune .. If so is there a way around it ?
Iv had a bit of a problame with the coils today as I have found out that they are dead 
Hope some one can help me ? Dan
|
|
|
|
|
40inches
|
| posted on 29/5/13 at 04:48 PM |
|
|
You're not having a lot of luck Dan!
Have you put the 100 ohm resistor in the grey wire from ignition switch to ECU? The security device in the original barrel is a 100ohm resistor
Some good advice in this thread http://www.locostbuilders.co.uk/viewthread.php?tid=85055
Follow it until the end, then check the links in the thread.
[Edited on 29-5-13 by 40inches]
[Edited on 29-5-13 by 40inches]
|
|
|
Hopley89
|
| posted on 29/5/13 at 05:11 PM |
|
|
There is one but I don't no if any good as it was already there .. Ill have to strip the wires back and have a look ..
Tell me about it mate it dosnt help when you get the engine of someone who hasn't got a f@ckin clue lol ...
If for any reason it's bypassed dose that mean the ecu is dead ? Please say no lol haha
Dan
|
|
|
40inches
|
| posted on 29/5/13 at 05:51 PM |
|
|
No, the ECU will be looking for around 9volts, if it sees 12volts it will sulk 
Sent you a U2U.
|
|
|
dave_424
|
| posted on 29/5/13 at 06:10 PM |
|
|
What year ZX9 have you got? I just changed over to fuel injection and megasquirt on mine and have a spare 1998 C1 CDI that you can use for testing if
you need it.
Dave
|
|
|
Hopley89
|
| posted on 29/5/13 at 07:50 PM |
|
|
Hi mate Iv got a b3 but I think they all suit ? Ill send you a pic of the connection and cdi if you want to compare if that's ok mate ?
Dan
|
|
|
dave_424
|
| posted on 29/5/13 at 08:12 PM |
|
|
Send away
|
|
|
Hopley89
|
| posted on 29/5/13 at 08:27 PM |
|
|
What's you email ? As I don't no how to do it on hear ?
Dan
|
|
|
Hopley89
|
| posted on 29/5/13 at 08:27 PM |
|
|
eBay item.. This is the same
171043364660
Dan
|
|
|
dave_424
|
| posted on 29/5/13 at 08:30 PM |
|
|
Sorry but mine is this one
Kawasaki ZX9R ZX900 C1 C2 98 99 ECU cdi brains chips GOOD | eBay
|
|
|
rb968
|
| posted on 29/5/13 at 08:34 PM |
|
|
I have one of those in the garage. Had a B3/4 zx9 in my Indy.
Send me a message if its of use. Perfect working order. Got a full engine sat under a cover as well.
Rich
|
|
|
Hopley89
|
| posted on 29/5/13 at 08:39 PM |
|
|
U2u rb969
Thank you anyways mate .. It good to now there is plenty people out there willing to help  
|
|
|
Hopley89
|
| posted on 30/5/13 at 10:27 AM |
|
|
OMG,! Iv just spoke to some one about the 100 ohm resister ?
They said I need to now what one its is ect with watts ..... Help
|
|
|
40inches
|
| posted on 30/5/13 at 10:38 AM |
|
|
quote:
Originally posted by Hopley89
OMG,! Iv just spoke to some one about the 100 ohm resister ?
They said I need to now what one its is ect with watts ..... Help
A 1/4watt carbon film resistor is what I used, they are about 3p each
|
|
|
Hopley89
|
| posted on 30/5/13 at 10:46 AM |
|
|
Thanks rich
We're can I get it from ?
Dan
|
|
|
Hopley89
|
| posted on 30/5/13 at 10:49 AM |
|
|
230899763305 are they the ones ?
Dan
|
|
|
Hopley89
|
| posted on 30/5/13 at 10:49 AM |
|
|
Ebay item ..
|
|
|
40inches
|
| posted on 30/5/13 at 11:08 AM |
|
|
quote:
Originally posted by Hopley89
230899763305 are they the ones ?
Dan
They will do, 200 should be enough
|
|
|
coozer
|
| posted on 30/5/13 at 11:24 AM |
|
|
You dont need any of it, you can bypass it easy.
1972 V8 Jago
1980 Z750
|
|
|
40inches
|
| posted on 30/5/13 at 11:26 AM |
|
|
quote:
Originally posted by coozer
You dont need any of it, you can bypass it easy.
How? The ECU needs to see 9volts not 12, or am I wrong?
|
|
|
Hopley89
|
| posted on 30/5/13 at 11:36 AM |
|
|
Yea I think your right 40inches when I spoke Kawasaki they said the cdi needs 9vsif it has 12 it can blow the cdi unit ..
How can you bypass it ? Iv found them in maplins
Dan
|
|
|
Hopley89
|
| posted on 30/5/13 at 02:20 PM |
|
|
Iv just got them from maplin .. 30p each  
|
|
|
Hopley89
|
| posted on 31/5/13 at 08:17 PM |
|
|
I GOT IT GOING WOOOOOOOOOO
|
|
|
40inches
|
| posted on 31/5/13 at 08:21 PM |
|
|
quote:
Originally posted by Hopley89
I GOT IT GOING WOOOOOOOOOO
Whose the clever boy then?
Good job Dan, like the way you stuck at it. Good feeling aint it?
|
|
|
Hopley89
|
| posted on 31/5/13 at 09:08 PM |
|
|
yea the best feeling going when she fired up i was well chuffed mate ... a long process but well worth it
all thanks to you tho 40inches i would never of got it done otherwise
|
|
|
