Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Duratec plumbing
TrophyJem

posted on 28/1/14 at 12:38 PM Reply With Quote
Duratec plumbing

Does anybody have a nice diagram of how I need to plumb a Duratec?

Preferably with a heater.

Cheers

View User's Profile View All Posts By User U2U Member
deeceee09

posted on 28/1/14 at 02:47 PM Reply With Quote
Does this help?

http://www.uphillracers.com/showthread.php/fiesta-duratec-saloon-libre-2786p32.html?highlight=cooling+duratec





Treachery and old age will always triumph over youthful enthusiasm.

View User's Profile View All Posts By User U2U Member
big-vee-twin

posted on 28/1/14 at 04:47 PM Reply With Quote
This is how I have done mine I also have a heater plumbed up.


[img] Description
Description
[/img]

Heater is connected across the connection marked as blanked off and teed into the header tank return.

[Edited on 28/1/14 by big-vee-twin]





Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016

http://www.triangleltd.com

View User's Profile View All Posts By User U2U Member
peter030371

posted on 28/1/14 at 05:49 PM Reply With Quote
or this http://duratec.wikispaces.com/modification-CosworthOilCooler with a St150 oil cooler fitted
View User's Profile View All Posts By User U2U Member
TrophyJem

posted on 29/1/14 at 09:24 AM Reply With Quote
That should point me in the right direction.

Cheers

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.