Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: please forgive me for I have sinned
DavidhMX5

posted on 6/4/19 at 06:12 AM Reply With Quote
please forgive me for I have sinned

I was planning to build the chassis at work over the easter break. Only issue I had with this is that it felt like I was heading for a busmans holiday as i do a fair bit of welding anyway.
So yesterday I visited GBS and long story short placed a deposit on a zero GT kit.
Does this mean I will now be sent to coventry , hope not as there is a wealth of experience on here I would still love to tap in to.
To make up for my sin in some small way here is some car porn. This is the new front end upgrade available and yes I did opt for it.



View User's Profile View All Posts By User U2U Member
big_wasa

posted on 6/4/19 at 07:17 AM Reply With Quote
Very bling.

There are very few people left on here with the time to do a full scratch build.

Is just a sign of the times.

I hope to get over to one of the coffee mornings myself this year.

One thing about Gbs, the do try and grow the product.

View User's Profile View All Posts By User U2U Member
SJ

posted on 6/4/19 at 10:40 AM Reply With Quote
Nice! Are they GBS' own hubs?
View User's Profile View All Posts By User U2U Member
DavidhMX5

posted on 6/4/19 at 11:55 AM Reply With Quote
quote:
Originally posted by SJ
Nice! Are they GBS' own hubs?

Yep. Also do set for rear.

View User's Profile View All Posts By User U2U Member
907

posted on 6/4/19 at 12:06 PM Reply With Quote
quote:
Originally posted by big_wasa
Very bling.

There are very few people left on here with the time to do a full scratch build.
_______________________________________________________________


Is just a sign of the times.

I hope to get over to one of the coffee mornings myself this year.

One thing about Gbs, the do try and grow the product.






Every ones day is 24 hours long. 'shrug'






View User's Profile View All Posts By User U2U Member
MikeR
Contributor






Posts 8600
Registered 25/5/02
Location Hinckley
Member Is Offline

Photo Archive Go!
Building: Slowcost since 2000, speeduino since 2020, Caterha

posted on 6/4/19 at 04:59 PM Reply With Quote
Every day may be 24 hours, but these days work is taking up 2 to 4 more hours than it used to.
View User's Profile View All Posts By User U2U Member
loggyboy

posted on 6/4/19 at 05:10 PM Reply With Quote
**awaiting rod ends in shear comment**
View User's Profile View All Posts By User U2U Member
MikeR
Contributor






Posts 8600
Registered 25/5/02
Location Hinckley
Member Is Offline

Photo Archive Go!
Building: Slowcost since 2000, speeduino since 2020, Caterha

posted on 6/4/19 at 09:06 PM Reply With Quote
Assuming the top joint is for location and not load bearing, of day the rose joints are in the correct orientation.

What am I missing?

View User's Profile View All Posts By User U2U Member
wylliezx9r

posted on 7/4/19 at 06:49 AM Reply With Quote
quote:
Originally posted by MikeR
Assuming the top joint is for location and not load bearing, of day the rose joints are in the correct orientation.

What am I missing?


I agree it looks correct to me. How is it any different to a tapered ball joint going into the top of a Sierra upright for example ?

[Edited on 7/4/19 by wylliezx9r]





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
DavidhMX5

posted on 7/4/19 at 08:16 AM Reply With Quote
quote:
Originally posted by 907
Every ones day is 24 hours long. 'shrug'

It's not so much about the time, it's the welding.
Part of my job is to make these


Once the tops and feet are on it runs to around 130 welds per base.

Add in the hood (blue bit on top) which I also weld ..........


and that adds up to plenty of practice.
Building the chassis just seems to me like work rather than fun hence my decision to buy rather than build.
Yes I could build it and yes I have the time to build it but I just want to spend my free time doing more enjoyable stuff rather than duplicating what I do a fair bit of for a living.

View User's Profile View All Posts By User U2U Member
TRX

posted on 8/4/19 at 02:11 AM Reply With Quote
quote:
Originally posted by loggyboy
**awaiting rod ends in shear comment**


Since every OEM on the planet is fine with single shear for ball joints and tierod ends, it's good enough for me...

View User's Profile View All Posts By User U2U Member
WallerZero

posted on 8/4/19 at 07:40 AM Reply With Quote
How much was the bling front and rear if you don't mind me asking?

As the GBS chassis is a self confessed parallelogram, it would be useful to have some decent geometry adjustment to correct it! lol





http://zachsgbszero.blogspot.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
wylliezx9r

posted on 8/4/19 at 10:29 AM Reply With Quote
quote:
Originally posted by WallerZero
How much was the bling front and rear if you don't mind me asking?

As the GBS chassis is a self confessed parallelogram, it would be useful to have some decent geometry adjustment to correct it! lol


Linky

Spoiler: £4,995.67 inc VAT

Complete ATR Upgrade Brake Kit:

- Full Front Brake Kit (See part number PAC0003 for more details)
- Front upright upgrade (See part number PAC0004 for more details)
- High grade CDS rear wishbone assemblies including performance rose joint bearings - Fully adjustable.
- Billet aluminium rear upright assemblies.
- Self-contained wheel bearing assemblies.
- High performance conversion drive shafts.
- Lightweight aluminium rear calipers.
- 265mm rear discs.
- Rear pads
- All associated fasteners required for fitment.

These come anodised in Black as standard. Other anodised colours are available at an additional cost.

*This will require all the wheels to be converted to 4x100 pattern if installing on a Ford based car.

[Edited on 8/4/19 by wylliezx9r]





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
DavidhMX5

posted on 8/4/19 at 05:38 PM Reply With Quote
I only went for complete front inc brakes and just wishbones at rear. You can buy as much or as little as you want.

[Edited on 8/4/19 by DavidhMX5]

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 8/4/19 at 06:47 PM Reply With Quote
quote:
Originally posted by WallerZero
How much was the bling front and rear if you don't mind me asking?

As the GBS chassis is a self confessed parallelogram, it would be useful to have some decent geometry adjustment to correct it! lol


I am surprised, it looks well made and with all the laser cut parts you would at least expect it to be all squar.

View User's Profile View All Posts By User U2U Member
WallerZero

posted on 9/4/19 at 07:29 AM Reply With Quote
quote:
Originally posted by big_wasa
quote:
Originally posted by WallerZero
How much was the bling front and rear if you don't mind me asking?

As the GBS chassis is a self confessed parallelogram, it would be useful to have some decent geometry adjustment to correct it! lol


I am surprised, it looks well made and with all the laser cut parts you would at least expect it to be all squar.


I was also surprised when I was informed. Its also doubled as a selling point for some rear adjustment parts later down the line when I enquired haha. It comes down to the jigging when welding. Apparently it is (or was) very poor. To me, this brake/hub kit looks to have a lot of adjustment available. Part of me thinks this is more a plaster to cover other issues in the manufacturing process but I am talking 5-ish years since I was run through it (but only around 18 months ago the chassis jigging came up.





http://zachsgbszero.blogspot.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.