Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: ZZR11OO Clutch
rwd69

posted on 19/2/20 at 06:19 PM Reply With Quote
ZZR11OO Clutch

Im using a ZZR1100 engine. What id like to know if anyone has used this engine what did you do out the clutch operation as its hydraulic. Is there a conversion to be able to use a cable or is there a suitable sized master cylinder I could use
View User's Profile View All Posts By User U2U Member
russbost

posted on 20/2/20 at 09:42 AM Reply With Quote
With a bike engine the best master cylinder is always the one off the bike, I believe all ZZR1100, ZX10 (89-90) & ZZR1200 (NOT Zx12!) are the same, fairly simply to adapt to a pedal box.





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
rwd69

posted on 21/2/20 at 08:23 PM Reply With Quote
quote:
Originally posted by russbost
With a bike engine the best master cylinder is always the one off the bike, I believe all ZZR1100, ZX10 (89-90) & ZZR1200 (NOT Zx12!) are the same, fairly simply to adapt to a pedal box.


Ok Do you have any info, photos etc on ways of doing it ? Thanks

View User's Profile View All Posts By User U2U Member
russbost

posted on 24/2/20 at 09:35 AM Reply With Quote
Ok, so first I removed a section from the front of the cylinder so it has a flat face

[img] Modified M/Cyl
Modified M/Cyl
[/img]

Welded a bracket to the front of existing pedal box to accept the new cylinder

[img] Bracket to front of pedal box
Bracket to front of pedal box
[/img]

slimmed & rounded off the existing pushrod for the car cylinder


[img] Pushrod thro' pedal box frontplate
Pushrod thro' pedal box frontplate
[/img]

Cylinders all in place from above

[img] Pedal box
Pedal box
[/img]

& from the side

[img] pedal box clutch
pedal box clutch
[/img]

This is on my own bespoke pedal box for the Furore, but principle is identical on any pedal box





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Rod Ends

posted on 24/2/20 at 04:51 PM Reply With Quote
Or use a bike rear brake master cylinder: www.locostbuilders.co.uk/viewthread.php?tid=175321
View User's Profile View All Posts By User U2U Member
rwd69

posted on 24/2/20 at 06:25 PM Reply With Quote
quote:
Originally posted by russbost
Ok, so first I removed a section from the front of the cylinder so it has a flat face

[img] Modified M/Cyl
Modified M/Cyl
[/img]

Welded a bracket to the front of existing pedal box to accept the new cylinder

[img] Bracket to front of pedal box
Bracket to front of pedal box
[/img]

slimmed & rounded off the existing pushrod for the car cylinder


[img] Pushrod thro' pedal box frontplate
Pushrod thro' pedal box frontplate
[/img]

Cylinders all in place from above

[img] Pedal box
Pedal box
[/img]

& from the side

[img] pedal box clutch
pedal box clutch
[/img]

This is on my own bespoke pedal box for the Furore, but principle is identical on any pedal box


Thanks for that. That's give me a good idea on how to sort it now. Much appreciated

View User's Profile View All Posts By User U2U Member
rwd69

posted on 24/2/20 at 06:26 PM Reply With Quote
quote:
Originally posted by Rod Ends
Or use a bike rear brake master cylinder: www.locostbuilders.co.uk/viewthread.php?tid=175321


I did think of that But was unsure wether it would work

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.