Hi,

I am on the lookout for a 3.14 diff for my next project, got a 3.92 and a 3.62 in my shed, but unfortunately not a 3.14

Hi,

Are you after just the CW+P? or the whole diff?

Regards,

Preferably the whole diff.

However, I would be stripping it down to fit an ATB so a crownwheel and pinion could be in a option.

I have one, im 99% sure its too long for what im after, so it might be fine for yourself. Im away from home at the moment and back next week, ill do some calcs and let you know. It's in a housing etc

Regards

Raceline show them

http://www.racelineonline.co.uk/products/part_section.asp?SectionID=86&CategoryID=6

There is also one on eBay. 321722891087

I'm after a 3.38 if anyone's got one too,

Hi Sam

Thanks very much, that would be great if you could have a look at it. If it is too long and a 3.62 or 3.92 is more use to you then I have some of those.

Hi Matt

Thanks very much for the info on new crownwheel and pinions from Raceline, I was not aware you could get hold of new ones. I was contemplating fitting a Freelander diff with a view to getting replacements in the future, but if new crownwheels and pinions are available then I would like to stay with a Sierra diff as I have three complete diffs and several shafts.

On Raceline page under Details link there's stated "Second Hand Ratio - checked, inspected and cleaned".
I have a 3.38 push-in type 7" Sierra diff available. £230 delivered to mainland UK.

quote:

---

Originally posted by Rosco86
I'm after a 3.38 if anyone's got one too,

---

Oh well, secondhand rather than new :/
Mind you they are pretty reliable.