Hi Guys, have some items to sell below. I'm not too sure on what to ask for these so if my prices are too high/too low please give me heads up via U2U.

Located in Iver Heath, South Bucks


Complete Westfield 2.0 zetec exhaust system -

Manifold was purchased from Westfield a few years ago, used but in great condition as can be seen from the pictures. It's stainless steel so will polish up a treat and it has the Westfield/stamp logo on it. £365 new from WF, asking £240

Silencer is a nice solid bit of kit, repackable 6 inch, small scrap underneath but not visible when in position - £140

http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=197&search=zetec+exhaust












MT75 Gearbox and prop for Zetec

This was fitted in a Westfield with a 2.0 silver top zetec that had covered 12’000 miles, no issues and it seems to be in very good condition. Complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling etc so it's ready to drop in and use. £300 collected








Starter motor for zetec, o/s position, sold to me as new but I have not used it. £offers




N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £20




Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers





4 Revolution copy alloy wheels. Ford fitment 108pcd with 100mm backspace. In need of a refurb - £40 collected



3 original vintage Revolution alloys. 13x7” Ford fitment, 4” backspace. Classic design in need of a refurb. £90 collected






Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm between threads, 5cm thread each side. £60 collected








[Edited on 20/5/17 by OwenSP]

[Edited on 22/5/17 by OwenSP]

[Edited on 22/5/17 by OwenSP]

Would the bellhousing work with a type 9 do you know ?

I believe if it fits a type E it will fit a type 9, I will check the Burton catalogue and get back to you.

First dibs on the manifold please, if it will fit a narrowbody?

U2U sent.


Daniel

Location?

Apologies - located in Iver Heath, South Bucks

Can you let me know how much you want for the starter motor posted to SW London?

What size are the 4 revolution copies ? Cheers

Interested in what size the copies are too?

Hi, interested in those revolution 7x13's, can collect on my way home from work, so when would be best?. I'll try and send a message

If I do manage to make contact and buy, does anybody in Herts/Cambs want anything bringing up?

[Edited on 28/5/17 by AndyGilbert]

U2Us sent and replied to.

The revolution copies are 13x6

[Edited on 29/5/17 by OwenSP]

Open to offers

Exhaust and manifold together £320

U2U' d regarding the revolution copy wheels .

Cheers

I'm collecting parts on Friday, I live North of Cambridge and travelling home via Broxbourne Herts (A10) so if anyone is buying and wants me to bring it back for the weekend let me know.

U2U replied

**Revolutions 13x7 sold pending pick up**

All wheels sold, open to offers on everything else

Would you be able to send the exhaust and silencer? Or even wrap it so that I could send in a courier to collect?

Would you concider posting the rack ?

I'm sure I could wrap/package the exhaust and mani if you were to organise a courier. Could probably do the same for the rack.

Hi there - is your zetec manifold still for sale? Thanks.

U2U sent for bell housing and starter

Thanks

Hi guys, I've been away for the last few weeks and will reply to all your U2U messages shortly.

The manifold and exhaust are provisionally sold.

Manifold and exhaust now sold.



Still available:

1. MT75 Gearbox and prop for Zetec complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling etc so it's ready to drop in and use. £300ono collected

2. Starter motor for zetec, o/s position, new. £40

3. N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £10 collected

4. Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers

5. Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm between threads, 5cm thread each side. £60 collected



Photos no longer work because the website has changed their rules. Please contact me if you are interested in something and i can send pics..

bump

bump

I think you would need to repost the pictures as using photobucket is no longer working on here, all we are getting is please update your acccounr.

Adrian

Hi Adrian, yes annoyingly photobucket has changed their rules about 3rd party hosting. I'm in the process of changing over and finding a new hosting site but if anyone is interested in anything in the mean time I can email/whatsapp pictures until then.