Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Minor scratch on diff pinion flange sealing face
JekRankin

posted on 9/6/20 at 09:16 AM Reply With Quote
Minor scratch on diff pinion flange sealing face

So I've been replacing my diff pinion oil seal.

Upon removal of the flange, I noticed a very minor scratch on the surface of the sealing face on the flange shaft. I'm not sure if this could have caused the leak.

It really is very shallow, and a couple of rubs with 1200grit wet and dry saw it disappear very quickly. My feeling is, it'll be fine to reuse, however, I'm not sure what kind of finish to return to the shaft - should I polish it up, or is 1200 grit wet and dry sufficient?

Jek

View User's Profile View All Posts By User U2U Member
nick205

posted on 9/6/20 at 11:47 AM Reply With Quote
Any photos?

What does the rest of the surface look like?

Provided it's not going to abrade the surface of the seal and cause another leak I'd probably be tempted to leave it as is and put it back together.

View User's Profile View All Posts By User U2U Member
cliftyhanger

posted on 9/6/20 at 02:31 PM Reply With Quote
If in doubt, use a speedi sleeve.
View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 9/6/20 at 04:58 PM Reply With Quote
If it disappeared using 1200 wet and dry I doubt it’s worth worrying about. Not exactly the most abrasive grade of paper
View User's Profile View All Posts By User U2U Member
Mr Whippy

posted on 9/6/20 at 08:17 PM Reply With Quote
What you've done is find just refit it
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.