Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fitting an acewell 6456 digi dash
nick-york

posted on 26/10/17 at 08:55 PM Reply With Quote
Fitting an acewell 6456 digi dash

Has anybody fitted one of these before ?if so I was wondering how easy a job it is ?And how long roughly to fit ?I've currently got what I think is escort dash with lots of the old rocker switches with the symbols on .cheers
View User's Profile View All Posts By User U2U Member
Nickp

posted on 26/10/17 at 09:21 PM Reply With Quote
I fitted one no probs but mine was a new build.
Only issue I had was 2 wires were crossed from the factory. They'd mixed the perm live with the ign live after the main plug. Easily sorted once I realised what was going on.

View User's Profile View All Posts By User U2U Member
luke2152

posted on 27/10/17 at 08:48 PM Reply With Quote
I put 6x56 on my bike. Was a new build so everything wired from scratch which made things simpler. The wiring diagram which came with it was correct, however I also downloaded one from the acewell site before it arrived and the downloaded one had some minor differences which took me ages to figure out.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.