Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Garage Clear Out
tomduffield13

posted on 23/7/18 at 08:40 PM Reply With Quote
Garage Clear Out

With an extension in the near future, I've been instructed to have a clear out, apparently we need the space!

All located in Sutton Coldfield, West Mids - will post for cost. If needed, I frequent Lincoln, Coventry, Stoke, Derby and Birmingham.

I've posted the price i'd be comfortable with, but all offers are welcome and be considered!

Here we go:

1. Acewell 7652 Digidash - Used, but good condition - £100

Digidash
Digidash


2. Alloy Header Tank - £20

Header1
Header1


3. RamAir Trumpet Socks - £20

Socks
Socks


4. Rad with Fan - £30

Rd2
Rd2


5. Speedo and Rev Counter - SOLD

DIals
DIals


6. DanST Duratec Manifold, Heavy Duty Gasket, CBR ITBs with injectors (recently balanced), Trumpets and Pipercross Filter - Cost in excess of £500 - £250

Inlet
Inlet

ITBsTJD2
ITBsTJD2


7. Doors - £50

Doors
Doors


8. Alloy Header Tank - £20

Header2
Header2


9. MS1 - SOLD

MS1
MS1


10. MS Simulator - £50

MSCont
MSCont


11. 12v Clock - £5

Clock
Clock


12. VDO Temp - £10

Temp
Temp


13. VDO Fuel - £10

Fuel
Fuel


14. Pipercross Filter - £10

Pipercross
Pipercross


15. Pinto Clutch - SOLD

PLate
PLate


16. 220m Clutch - £20

PLate2
PLate2


17. Alloy Rad - £40

Radiator
Radiator


[Edited on 24/7/18 by tomduffield13]

[Edited on 24/7/18 by tomduffield13]

[Edited on 25/7/18 by tomduffield13]

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile E-Mail User View All Posts By User U2U Member
ttalps2000

posted on 23/7/18 at 09:14 PM Reply With Quote
U2U sent re MS1
View User's Profile View All Posts By User U2U Member
Norfolkluegojnr

posted on 24/7/18 at 07:36 AM Reply With Quote
Is the speedo mechanical or electric?

What is the diameter?

View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 24/7/18 at 08:01 AM Reply With Quote
quote:
Originally posted by Norfolkluegojnr
Is the speedo mechanical or electric?

What is the diameter?


Mechanical, Iíll measure tonight for you.... from memory it canít be far off 100mm

View User's Profile E-Mail User View All Posts By User U2U Member
Norfolkluegojnr

posted on 24/7/18 at 09:07 AM Reply With Quote
Thanks let me know, could be just what i'm after - mine current reads sod all!
View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 24/7/18 at 04:35 PM Reply With Quote
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!


Near as makes no difference 100mm, 103mm to be exact!

View User's Profile E-Mail User View All Posts By User U2U Member
Norfolkluegojnr

posted on 24/7/18 at 08:02 PM Reply With Quote
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!


Near as makes no difference 100mm, 103mm to be exact!


bugger! the hole is 90mm, with no room to increase. Thanks anyway

View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 24/7/18 at 08:22 PM Reply With Quote
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!


Near as makes no difference 100mm, 103mm to be exact!


bugger! the hole is 90mm, with no room to increase. Thanks anyway


Ahh, that's the front measurement, the insert is smaller so it sits on the dash.

Picture with tape measure: https://ibb.co/k8ZVuT

Tom

View User's Profile E-Mail User View All Posts By User U2U Member
snapper

posted on 25/7/18 at 06:44 AM Reply With Quote
Iíll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks





I eat to survive
I drink to forget
I breath to wee my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 25/7/18 at 07:02 AM Reply With Quote
quote:
Originally posted by snapper
Iíll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks


Iíve had a first interest on the TBs, so youíre pencilled in if they donít want them snapper.

Iíll send you the details tonight when Iím home from work.

View User's Profile E-Mail User View All Posts By User U2U Member
Norfolkluegojnr

posted on 25/7/18 at 07:57 AM Reply With Quote
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!


Near as makes no difference 100mm, 103mm to be exact!


bugger! the hole is 90mm, with no room to increase. Thanks anyway


Ahh, that's the front measurement, the insert is smaller so it sits on the dash.

Picture with tape measure: https://ibb.co/k8ZVuT

Tom


great thanks. I've replied to your U2U

View User's Profile View All Posts By User U2U Member
motojohn

posted on 25/7/18 at 01:39 PM Reply With Quote
Can i have the alloy rad #17 and the alloy header tank #8 please
View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 25/7/18 at 02:13 PM Reply With Quote
quote:
Originally posted by motojohn
Can i have the alloy rad #17 and the alloy header tank #8 please


Yes, u2u your address and Iíll get postage costs from the post room at work today.

View User's Profile E-Mail User View All Posts By User U2U Member
snapper

posted on 25/7/18 at 06:29 PM Reply With Quote
quote:
Originally posted by tomduffield13
quote:
Originally posted by snapper
Iíll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks


Iíve had a first interest on the TBs, so youíre pencilled in if they donít want them snapper.

Iíll send you the details tonight when Iím home from work.


Thanks, waiting with fingers crossed





I eat to survive
I drink to forget
I breath to wee my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
tomduffield13

posted on 1/8/18 at 09:24 AM Reply With Quote
8 (Header), 10 (Stim) and 17 (Rad) also sold.

Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.

Anyone for anymore before I list on Ebay? (Offers invited!)

View User's Profile E-Mail User View All Posts By User U2U Member
Angel Acevedo

posted on 1/8/18 at 09:54 PM Reply With Quote
quote:
Originally posted by tomduffield13
8 (Header), 10 (Stim) and 17 (Rad) also sold.

Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.

Anyone for anymore before I list on Ebay? (Offers invited!)



Long shot...
How much for alloy tank # 2 shipped to sunny Mťxico, Post Code 24120?
Thanks.
AA





Beware of what you wish.. for it may come true....

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
tomduffield13

posted on 2/8/18 at 10:50 AM Reply With Quote
Thanks for your enquiry!

£21.10 through royal mail international, 5-7 days - so £41 all together.

Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay... has anyone got experience of this, where you ship it domestically and they forward on?

[Edited on 2/8/18 by tomduffield13]

View User's Profile E-Mail User View All Posts By User U2U Member
ReMan

posted on 3/8/18 at 09:33 AM Reply With Quote
u2u re Acewell





www.plusnine.co.uk
∙،į. ˘‘≈Űﺣ

View User's Profile Visit User's Homepage View All Posts By User U2U Member   ReMan 's ICQ status
tomduffield13

posted on 3/8/18 at 02:39 PM Reply With Quote
Update:

1. Acewell 7652 Digidash - Used, but good condition - SOLD
2. Alloy Header Tank - £20
3. RamAir Trumpet Socks - £20
4. Rad with Fan - £30
5. Speedo and Rev Counter - SOLD
6. DanST Duratec Manifold, Gasket, CBR ITBs with injectors, Trumpets and Pipercross Filter - SOLD
7. Doors - £50
8. Alloy Header Tank - SOLD
9. MS1 - SOLD
10. MS Simulator - SOLD
11. 12v Clock - £5
12. VDO Temp - £10
13. VDO Fuel - £10
14. Pipercross Filter - £10
15. Pinto Clutch - SOLD
16. 220m Clutch - £20
17. Alloy Rad - SOLD

Open to the cheekiest of offers, ask away.

View User's Profile E-Mail User View All Posts By User U2U Member
Angel Acevedo

posted on 3/8/18 at 02:41 PM Reply With Quote
quote:
Originally posted by tomduffield13
Thanks for your enquiry!

£21.10 through royal mail international, 5-7 days - so £41 all together.

Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay... has anyone got experience of this, where you ship it domestically and they forward on?

[Edited on 2/8/18 by tomduffield13]


Thanks,
I think Iīll pass...
Free Bump...






Beware of what you wish.. for it may come true....

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.