LocostBuilders - powered by XMB

where do i get........

markyb - 11/9/14 at 08:42 PM

...the pins that connect a rally design upright (cortina geometry) to the upper wishbone rosejoint on my MNR.

I have done a search and cant find them anywhere although I dont know the actual name for them which may be hindering me.

thanks

daniel mason - 11/9/14 at 08:55 PM

Do mnr not stock them? Or are for the older raceleda upright?

markyb - 11/9/14 at 09:01 PM

I thought that they might be available online elsewhere but looks like balljoints are the standard mode for most manufacturers going by my online searching - will drop Chris an email and see if they still have/make them

Doctor Derek Doctors - 12/9/14 at 02:33 PM

Hi mate,

I designed and made my own for my hillclimb car, the attach the Rally Design Uprights to Wishbones with 5/8 rod ends, I'm going to make up a batch of kits as I have had some interest from other people as well. If you are interested send me a U2U with an e-mail and I can send some more details over.

[Edited on 12/9/14 by Doctor Derek Doctors]