Got a Girling Tandem Brake Master Cyl on Kitcar with a tag around it.

The number 66 198 02 50/50 40P0, but cannot see any other than Girling cast on the body and its horizontally fitted not at an angle.

Anyone identify it please.

Thanks

Post a picture, or a few, that always helps.

Here are some Pics of the Cylinder to help.
Also it's connected to Escort MK2 Calipers and Escort MK1 Axle.

Thanks

[img]http://[/img]
[img][/img]

[Edited on 22/2/15 by sooty]

Its from an early type Ford Fiesta (up to '83). Has bore of 17.8mm dia.

Hello Dick - I was just about to send you a U2U to see if you could help

Thanks Dick,

The only Master I can find for the Fiesta, show the mount flange at an angle, where mine is horizontal.

And the only Master I can find near, is either a PMC101 or PMC157.

Do you have a part No. for the one shown or should be looking for.

Thanks again