Board logo

Sierra 7" Diff Input Flange Bolt Spacing
Doctor Derek Doctors - 28/10/15 at 12:16 PM

Does anyone know or have the drawing for the input flange bolt spacing on a Sierra diff?

Best info I can find is that its a 4 bolt on a 90mm PCD with M10 fine threads, I'm sure though that its a rectangular spacing and not square and these are the details that I cant find. IE the rectangular spacing.

Cheers

Rosco86 - 28/10/15 at 01:18 PM

hold on a min

[Edited on 28/10/15 by Rosco86]

Rosco86 - 28/10/15 at 01:33 PM



Hows that

Doctor Derek Doctors - 28/10/15 at 01:56 PM

Cheers, that confirms the information I just got from another source that its a 60 x 67mm rectangle.

I can get the drawing over to the water jet cutter now.

Doctor Derek Doctors - 28/10/15 at 02:08 PM

Is that your drawing Rosco? Do you have the original CAD Data/DXF for it?

Rosco86 - 28/10/15 at 02:12 PM

yeah

Rosco86 - 28/10/15 at 08:29 PM

U2u your email and will send it you