Board logo

Sierra Upright Tapering
the_big_1 - 19/10/16 at 11:52 AM

Hi Guys,

I need a Sierra uprights tapering out to accept the maxi ball joint etc.
Can you recommend who can help around the Midlands area?

I tried to contact MK a few times but no email response and no answering calls etc.


Cheers!

procomp - 19/10/16 at 12:24 PM

Hi. I'm pretty sure i've still got the jigs and reamers to do the job.
Just of J6 M6.
Cheers Matt

the_big_1 - 19/10/16 at 12:34 PM

Hi,

I am junction 3 so that would be fab if you could check you have?

Cheers!!!

procomp - 19/10/16 at 12:48 PM

Hi.
Yes found it buried under a bench.
Ill U2U.

Cheers Matt

Irony - 19/10/16 at 03:57 PM

quote:
Originally posted by the_big_1
Hi Guys,

I need a Sierra uprights tapering out to accept the maxi ball joint etc.
Can you recommend who can help around the Midlands area?

I tried to contact MK a few times but no email response and no answering calls etc.


Cheers!



Yawn! Use the search function, there are hundreds of posts about it. You can do it with a reamer bought from Axminister Tools.

the_big_1 - 19/10/16 at 04:01 PM

They no longer sell it, haven't for years

Irony - 19/10/16 at 06:37 PM

quote:
Originally posted by the_big_1
They no longer sell it, haven't for years


That told me then.

However when I did mine I think I bought two. If you sort me out some beer tokens for the delivery I post one to you. Or preferably you could pick it up.

the_big_1 - 19/10/16 at 06:39 PM

lol it's always the way lol.
Hopefully the top man off here I am buying them
Off is going to send me his to do the job and post back.

You guys are fab!!!

ragindave - 20/10/16 at 06:58 AM

Westfield drill out and put an insert in it may worth contacting them as they may be able to help and you are probaby not far from them.