Hello all
i have been out of the kitcar world for a while and i am suprised how quiet this site is compared to 3/4 years ago, where has everybody gone !

anyway i have just bought a Dax Rush Fireblade and the drivers seat it a little to narrow for my fat bum, where is the best place to get them from now ?

cheers
Mick

Welcome back Mick.
Like you, I have been away and come back and it is definitely quieter.
Regarding your seats. Would it not be best just to go on a diet.
Sorry, couldn't resist.
Would wider seats fit. If not I would go for more of a basic flat leather type seat and use the sides of the car to hold you in while cornering.
Regards
Brad

What seats has it got?

I put two of the rear seats from a Renault Scenic in my Haynes - worked well and cost £10 for the three, Locost! The outer two fitted mine but I do know of others who used two of the narrower center seats in narrower cars

The dax chassis is very narrow compared to some - but I guess it depends what king you want...

Which seats has it got at the moment ?


bare GRP seats are going to give you more room - but might not be to your taste
I think these guys made a version tweaked for the Rush dimensions: http://www.jkcomposites.com/sevens/
A couple of folk on the dax forum have them


but I've gone for these:
http://www.intatrim.co.uk/stoneleigh.html
but customised to make them a tiny bit narrower at the front - but since these are all made to order thats not an issue
(mostly trimming the GRP shell down a little)
wish I could say they are in the car, but I can't get any time with it at the moment




[Edited on 25/6/2020 by mcerd1]

MK Indy not DAX Rush, but I used these

http://www.intatrim.co.uk/ranger.html

Fitted really well in the car, with the harnesses and comfortable for short and longer runs.

Hi all

Thank you for the replies, Roadrunner you are spot on about loosing weight and in the planning

it has got GRP seats fitted but there is an inch either side between the seat and body, i will take a pic or two tomorrow to show what i mean

interesting you mention that the Rush is narrow, my old MK felt tighter and my old MNR wider, maybe i was skinnier and or fatter then......

thanks
Mick

Glad to here it.

quote:

---

Originally posted by sonic
interesting you mention that the Rush is narrow, my old MK felt tighter and my old MNR wider, maybe i was skinnier and or fatter then......

---

compulsory floor panel pic

Hello Mcerd1

it is a bike engine MC square tude with a cossy lsd rear

Update i fit better now, i took the seat out and it was sat on 2 inch spacers at the front and 1 inch at the back making it tilt so the top of the seat back was as far as it could go. i removed the spacer which allowed the seat to go back about 2 inches by removing alot of the tilt. i fit great now and could go back another inch or so if needed.

Thanks
Mick

quote:

---

Originally posted by ianhurley20
I put two of the rear seats from a Renault Scenic in my Haynes - worked well and cost £10 for the three, Locost! The outer two fitted mine but I do know of others who used two of the narrower center seats in narrower cars

---

Sorry Angel - my cr was written off and the seats both oter and center went with it - but - they fitted the Haynes excatly and a few cars more with the center seat which wa s much narrower - and I found them very comfortable indeed