I have two MX5 engines for sale which i bought for a project which has changed direction

One is the MK2 1.8 BP-4W which has the best flowing head as standard and solid lifters, his came from rusted MX5 with 71,000 miles on the clock

The second engine is the Mk2.5 vvt BP6D which has the highest compression as standard of mx5 engine 10.0.1 (apart from the mk3 which use a different engine) and also has main bearing support plate (MBSP) to add more rigidity to the bottom end. This engine is also from an rusty MOT failed car with 68,000 mile on the clock.

My plan was to use the head from the MK2 engine on the MK2.5 block to make one quick N/A engine with a view to forced induction later.

The engines are collection only from Worcestershire.
The engines are £195 each or £350 for the pair ono.

I'll take some picturs at the weekend.

[Edited on 26/1/18 by Charlie C]

Now on Ebay with pictures

eBay Item

eBay Item

Hi

I also have two inlet maniflods for sale

MX5 mk2 1.8 eBay Item

MX5 mk2.5 1.8 eBay Item