loughlin1
|
| posted on 27/10/14 at 04:36 PM |
|
|
escort mk2 wheel studs
Hi All
I am missing a few wheel studs from the axle does any know what the thread size is and also the spline size is as well
as the 35mm studs are near impossible to get
|
|
|
|
|
loggyboy
|
| posted on 27/10/14 at 04:37 PM |
|
|
MK2 were metric m12 x 1.5 IIRC.
MK1 were imperial, cant recal size.
Sorry no idea on spline dia either.
[Edited on 27-10-14 by loggyboy]
Mistral Motorsport
|
|
|
loughlin1
|
| posted on 27/10/14 at 04:39 PM |
|
|
that is super many thanks
|
|
|
loggyboy
|
| posted on 27/10/14 at 04:42 PM |
|
|
This place seem to point to 13mm splines:
http://www.priracing.com/product.php/723/93/forged-wheel-stud---m12x1-5--13mm-spline-dia--65mm-overall-length
Mistral Motorsport
|
|
|
slingshot2000
|
| posted on 27/10/14 at 05:24 PM |
|
|
If you can wait a couple of hours, for me to dig out the box, I may well have some unused (NOS) ones with nuts to suit Ford steel wheels.
Regards
Jon
|
|
|
trextr7monkey
|
| posted on 27/10/14 at 05:44 PM |
|
|
Studs available fro Speedshack, Rally Design, burtons as well as Westfield
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
big_wasa
|
| posted on 27/10/14 at 07:17 PM |
|
|
You can even pick them up from ford  The ford Focus ones upto 2004 at least will be fine and be long enough for alloys as well.
|
|
|
