Fastdruid
|
| posted on 4/10/17 at 08:30 AM |
|
|
quote:
Originally posted by froggyWagon system is a lot more compact than the corsa with the ecu fixed onto the motor .
I don't suppose anyone has any measurements of the Agila/Wagon R column? Specifically how much the motor sticks out.
I need something that is (ideally) ~20mm narrower (on the right) than the Corsa B
|
|
|
|
|
froggy
|
| posted on 5/10/17 at 02:52 PM |
|
|
From the centreline of the shaft to the widest part of the motor is 200mm
[IMG]http://i144.photobucket.com/albums/r187/froggy_0[IMG]
|
|
|
Fastdruid
|
| posted on 5/10/17 at 03:06 PM |
|
|
Awesome. Thanks for that.
As a bonus it also looks like the Agila one points slightly "up" rather than slightly down which helps in my case.
Just for anyone else searching the Corsa B is 230mm for the same measurement, ie centre line to widest point. So it's *roughly* (and very
roughly) 3cm narrower.
|
|
|
Fastdruid
|
| posted on 6/10/17 at 04:32 PM |
|
|
One more question. I can't find a steering wheel adaptor that is listed for the Agila/Wagon R+. There seem to be a few different Suzuki ones.
I don't suppose anyone knows what it's the same as?
|
|
|
SCAR
|
| posted on 6/10/17 at 05:14 PM |
|
|
Does the car have a quick rack fitted? A change to a standard rack will ease the steering effort. You would probably even find someone willing to swap
|
|
|
Fastdruid
|
| posted on 10/10/17 at 11:02 AM |
|
|
To answer my own question. It appears to be 21.4mm with 66 splines. After some research I gathered on various spline sizes etc this is very different
from the Suzuki Swift/Jimny etc (15.0mm / 30 splines).
It does appear however to be the same as the following (21.5mm 66 splines):
BMW Z3 series E36 10/1995-01/2003: Z3 M3.2 1.8 1.9 2.0 2.2 2.8 3.0
BMW 3 series E36: M3 316g 316i 318i 318is 318ti 320i 323i 325i 325is 328i 318tds 325td 325tds
BMW 3 series E46 02/1998-2007: M3 316i 318i 320i 323i 325i 325xi 328i 330i 330xi 318d 320d 330d 330xd
BMW 5 series E39 11/1995-05/2004: M5 520i 523i 525i 528i 530i 535i 540i 520d 525td 525d 525tds 530d
MINI Cooper One Cooper S Cabrio R53 R52 R50 2000-2012 (Need 1/4" washers on top of hub so steering wheel nut tightens)
I'll probably get a Momo MA2012R, while it's a collapsible column anyway the extra collapsible boss/hub won't hurt for IVA
either.
EDIT: Just to confirm, I've tried the A2012 and it fits.
[Edited on 12/10/17 by Fastdruid]
|
|
|
froggy
|
| posted on 11/10/17 at 07:10 AM |
|
|
If your fitting the agila set up in an open top car the Ecu needs to be tucked away and put in a bag to keep it dry . I've gone through two Ecus
due to moisture damaging the board as they aren't sealed
[IMG]http://i144.photobucket.com/albums/r187/froggy_0[IMG]
|
|
|
