Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Wheels... Offsets... Sizes....
toolate

posted on 6/10/20 at 11:56 AM Reply With Quote
Wheels... Offsets... Sizes....

Hi all.
I have myself a Westfield with a set of 13" alloys with all 7" wide. The rears are running with 25mm spacers on.

I am looking to get myself a set of CXR alloys but i am unclear whether is should be getting then 7" wide all around or have the rears in 8"

Also, how do i work out which ET i should be getting or looking at?

Thanks
TooLate

View User's Profile View All Posts By User U2U Member
MikeR

posted on 6/10/20 at 02:20 PM Reply With Quote
nice site explain ET and how to calculate.

https://www.oponeo.co.uk/blog/wheel-width-and-et-offset-explained

Regarding your current question, you need to know the current wheel ET, then 'add' 25mm for the spacers. At that point you need to look at where the wheel is. How much space do you have at the rear (towards the middle of the car) and how much at the front (towards the pavement). You then can juggle the ET to fit the biggest wheel you want to. Although please check clearence when the wheel is going over a bump and the suspension is compressed. ie it doesn't rub inside the wheel arch.

View User's Profile View All Posts By User U2U Member
toolate

posted on 6/10/20 at 02:25 PM Reply With Quote
Thanks MikeR!
View User's Profile View All Posts By User U2U Member
CosKev3

posted on 6/10/20 at 02:32 PM Reply With Quote
I use

www.willtheyfit.com

Excellent site that tells you difference in speedo reading etc and a diagram of how the wheels will sit in the arch

View User's Profile View All Posts By User U2U Member
CosKev3

posted on 6/10/20 at 02:33 PM Reply With Quote
https://www.willtheyfit.com
View User's Profile View All Posts By User U2U Member
steve m

posted on 6/10/20 at 05:30 PM Reply With Quote
I believe i used the will they fit site as well, as it does look familiar

Hand have to say, that when i ordered my wheels, they were EXCACTLY what i was after, so proves doing your homework makes the job easier

steve





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.