Hi All,

Looking for inspiration on using the sierra clocks and making them look o.k. Can't afford flashy clocks, so anyone got some photos of using standard/modified sierra clocks..

Cheers

Dan

I used the sierra clocks there is 3 photos in my archives
If i new how to post them on here i would
Jacko

google robin hood dash ect

Not Sierra but Granada. Very similar. (same pod I believe).


Dash update

and


dash fitted with surround

Basically I removed the perspex front, cut it down almost flush (room for needles to move plus a bit). then used the mounting in reverse to mount onto back of dash and fit new perspex and alli surround to front.

My effort



Loads more in my gallery, link below.

Rich

Most instrument clusters like that use simple printed circuit boards. Meaning if you can solder, you can cut the gauges out and move them around as you like. Connect the wires you cut with some copper wire. Takes a little thinking, but you can end up with a nice setup for nothing. Even nicer if you get a decal made up for the backgrounds.

More pictures in my photo archive

Not as posh as some, but suites me. Ray


Description

Thanks all..

Dan