After more upgradeitus, I have my 1996 2.0L blacktop for sale.

Spec's are as follows;
as said 96 2.0L
Chopped two part sump
Gas flowed head, all valve seats machine cut by a fellow who used to do formula ford Xflows, Had 2 new valves.
ARP big end bearings to increase rev limit, i've been running a 7200 limit, but should be safe for 7600rpm.

There are no extras with the exception of the coilpack. The oil has been changed every 4000miles or 6 months which every came first.

Pic of sump chop before block prep.


phase 3 sump

The engine is sweet and sounds great, Facebook clip

All this can be your for £275, but open to sensiable offers.

Check out my 'WWW' below for more pics.
ATB Dan.

[Edited on 3/5/10 by scutter]

176 views, no one? Open to offers before going on the bay.

ATB Dan.

Hi, the vid does not work - i think it is due to privacy settings? So are you keeping all the ancillaries? manifolds? What gbox did you use with this, type 9 with cct133 bearing?

yes it ran a type 9 1800 flywheel and cct133 bearing.

There is nothing else with the engine bar a coil pack and leads, some sensors.

ATB Dan.

[Edited on 4/5/10 by scutter]

in 3 or 4 months I would have snapped this up, always the way!!

Hi, where abouts are you? I'm just trying to work out what else i'll need to get up and running to see if its within a feasible budget. I already have the type9 box with the correct bearing.

edit: also what is the approx mileage?

[Edited on 5/5/10 by Wumps]

You'll need the following;

Flywheel 1800 preferably
Induction, Carbs&Megajolt or throttle bodies and ECU
Exhaust system
Starter
Alt.

If it helps your budget i'll drop the price to £225. Mileage, it had 96k when it went into the kit and i've added another 7k.

Located at Carterton, West Oxfordshire.

ATB Dan.

[Edited on 5/5/10 by scutter]

Asking too much mate.

And, why has a silvertop got a blacktop sump?

Thanks for the offer and further info but mileage too high really sorry

Thanks very much! It's a blacktop 1998 vintage, i know as i've shimmed all 16 valves.
Sorry that came out wrong and i've listed the engine age wrong to start with

ATB Dan.

[Edited on 5/5/10 by scutter]

quote:

---

Originally posted by Wumps
Thanks for the offer and further info but mileage too high really sorry

---

No, I just smoothed a phase one blacktop ali cover and painted it.

ATB Dan.

SOLD pending payment and collection. Many thanks Dan.