Board logo

single seater project
iceman26 - 7/7/12 at 05:22 PM

hi i need this to go need the space back

i have a formula vauxhall junior van diemen chassis
i was going to fit a zx9r engine in it.
it come with
brand new van dieman steering rack (cost £275)
front uprights inc bearing, discs lower arms and top suspension
body work main tub , nose cone ,engine cover ,side pods lower x3
side pods upper x3 and battery crush box,
it comes also come with fuel bladder ,seat ,2x radiators,gerbox adapter


i also will inc zx9r engine compleat with standared exhaust headers and can
air box and all the parts to get it running
i will put some pictures up
and looking for about £1000 all in

eddie99 - 7/7/12 at 05:32 PM

So tempting... Too many projects Swap ya for our Global GT chassis/susp and few bits and bobs?

iceman26 - 7/7/12 at 05:38 PM

i would do but i need the space

eddie99 - 7/7/12 at 06:57 PM

Shame, look forward to the pics. Is any rear susp/axle there?

capri_big_jim - 7/7/12 at 08:52 PM

Pm sent.

martinslyon - 8/7/12 at 06:21 AM

quote:
Originally posted by iceman26
hi i need this to go need the space back

i have a formula vauxhall junior van diemen chassis
i was going to fit a zx9r engine in it.
it come with
brand new van dieman steering rack (cost £275)
front uprights inc bearing, discs lower arms and top suspension
body work main tub , nose cone ,engine cover ,side pods lower x3
side pods upper x3 and battery crush box,
it comes also come with fuel bladder ,seat ,2x radiators,gerbox adapter


i also will inc zx9r engine compleat with standared exhaust headers and can
air box and all the parts to get it running
i will put some pictures up
and looking for about £1000 all in


Hi, very interested, do you have any photos of the assembled front end, is it complete with all fittings/fixings and what do you have for the rear, can you send me more images please, where are you?
Regards Martin

martinlyon@freeuk.com

iceman26 - 8/7/12 at 09:52 AM

hi i have put some pictures in my archive and will email better ones over to people.

with the fvj you can bolt up your own engine cradle set up with suspension onto the rear
of the chassis tub so you dont need to weld to the chassis tub.

the parts that are missing from the front end are the coil overs,
and for the rear end i was going to make my own set up based around sierra

martinslyon - 8/7/12 at 10:00 AM

Hi Iceman,
Please send the new photos asap and we can do a deal once I have seen them.
I can pay immediately by Paypal or however you like.
Regards
Martin

email address is; martinlyon@freeuk.com