hi I have lots of stuff I need to clear out of the garage im not sure what they
are worth but open to offers on them I need them moved on

1. floor standing press its 15 ton it will need some new pins for the shelf
and has slight surface corrosion on it and the gauge not working correctly.
£75

2. bench drill 500w 9 speed chuck size 1.5-16mm I cant find the chuck key
at the moment but will look again its in the garage slight surface corrosion
but fully working.
£20

3. bench grinder 150w one of the guards has broken off but still full working
£5

4. Clarke 6 drill vice not used
£5

5. blue point auto darkening welding helmet not used but not tested
£15

6. wheels set of 4 wolfrace new with tyres have a few storage marks but nothing bad
are 6.5x15 I think pcd is 114 tyre size is 195/55/15v tyres are new
£60

7. box of roll pins only use a few
£5

8. box of o rings only few used
£5

9. selection of metal and plastic p clips
£5



I cant seem to upload pictures will put them in my photo archive

thanks

[Edited on 28/12/13 by iceman26]

U2u'd re welding helmet
O rings too please

[Edited on 28/12/13 by CRAIGR]

will do a picture of the helmet for you

Can you post pillar drill please.

I will also like the bench grinder and welding helmet if Craig does not.

[Edited on 28/12/13 by femster87]

u2u re; press.

Deffo up for the helmet and o rings

Dibbs on the drill vice

Tilly

U2U sent about the wheels.

welding helmet and o rings sold

drill vice sold