Board logo

BEC Wanted
Greenie - 24/6/14 at 03:25 PM

Hi after great deliberation and taking advise I have decided to take the plunge and purchase a BEC, I have looked at a few, but keep missing them, obviously in great demand.

So is there any out there, must be of good build and proven reliability.

[Edited on 24/6/14 by Greenie]


daniel mason - 24/6/14 at 05:13 PM

A quick look on pistonheads revealed a few!
STM Phoenix r1,
Fury class f RGB (a possibility to get on road)
R1 vortx
And the one I'd look at is the westy with the blown blade motor! Them mega blades are nice


Greenie - 24/6/14 at 05:42 PM

Yeah seen most of those, but after a Seven type car, the car Westfield with the blown engine is nice but too much work me, what is anyone's opinion of the Vortx?


daniel mason - 24/6/14 at 05:50 PM

You could easily get a 919 blade from Andy bates in that westy for under £1k and half a days work


ali f27 - 24/6/14 at 08:38 PM

Hi Purdy has a blade car for sale really pretty little car not svad yet was going to sell as a race car but would not take long to make it road ready


van cleef - 25/6/14 at 05:01 AM

Ooh that westfield is nice and if it was closer, I would be considering it for myself and I have a spare engine in the garage that needs a bit of tlc within the gearbox.


brookie - 25/6/14 at 03:02 PM

got this
Mk midi kitcar zx10r bike engine


Greenie - 25/6/14 at 03:21 PM

Cheers but looking for front engined version, but nice car!


bigdrew - 25/6/14 at 03:30 PM

Anyone got a link to the Westy? I can't see it on PH.


Greenie - 25/6/14 at 03:32 PM

It disappeared over night........ Snapped up no doubt.


jacko - 25/6/14 at 03:51 PM

http://www.pistonheads.com/classifieds/used-cars/kit-cars/mk/mk-indy-hayabusa/2433004


This is a nice well built car
Jacko


Greenie - 25/6/14 at 04:29 PM

Yeah it is, stunning and everything I am looking for, unfortunately my budget won't run that far.... :-(

[Edited on 25/6/14 by Greenie]


daniel mason - 25/6/14 at 05:26 PM

What about the westy mega r1 on wscc? £8k


kingster996 - 25/6/14 at 06:34 PM

There's a couple on PH in the Bike Powered Cars section

http://www.pistonheads.com/classifieds/used-cars/bike-powered-cars/cars

The MNR looks good and the MK is well priced.


Greenie - 25/6/14 at 08:20 PM

I am impressed with the MNR and it has everything I am looking for, just dont know much about them, are they any good?


kingster996 - 25/6/14 at 09:14 PM

I think you will find very favourable reports on MNR.

I went to see them and very nearly bought a kit, but plans changed as my funds moved about so to speak. In all honesty I'd recommend them in terms of helpfulness and quality, the chassis is beautifully built, and the bodywork is first rate, but can't personally comment on how the cars drive.

The owners mark n chris are really decent blokes to deal with and I'm sure you'd have no problem getting spares or help. They come from a racing background and so I believe the cars handle really well.


Greenie - 25/6/14 at 09:19 PM

That's great thanks, I will have a look at there web pages and do some research, they look a nice car. and the R1 engine is appealing... I have a friend who is R1 bike mad and he swears by them.


daniel mason - 25/6/14 at 10:56 PM

Its one of the early carbed r1's though I think. I had a 5jj r1 in a stripped out mnr and it was ok performance wise. The later 2004-2006 motors are a big step up in performance!


daniel mason - 25/6/14 at 10:57 PM

Its one of the early carbed r1's though I think. I had a 5jj r1 in a stripped out mnr and it was ok performance wise. The later 2004-2006 motors are a big step up in performance!


gaz_gaz - 26/6/14 at 06:47 AM

The MNR is nice.
Nothing wrong with the carbed R1 engines
They have more than enough grunt to make you grin.

It's worth mentioning that is an outboard MNR.
Although registered in 2007 the kit is probably a fair bit older.
Still looks really good though.


Greenie - 26/6/14 at 12:22 PM

Outboard?


kingster996 - 26/6/14 at 12:32 PM

Outboard means the front shocks are placed outside the chassis (like Westfield and Caterham) - and inboard means they are inside operated by pushrods (like the MK Indy-R and newer MNRs).

this thread has some info ref Inboard/Outboard on it as well as some hi res pics of an outboard MNR Vortx. Seems that outboard kits were still available in '07 so kit is about the right age.


[Edited on 26/6/14 by kingster996]


Greenie - 27/6/14 at 12:21 PM

What does anyone think of the MNR Vortx with the R1 engine on bike powered cars on Pistonheads, looks tempting?


kingster996 - 27/6/14 at 01:27 PM

That's the 'outboard' MNR we have been talking about - looks like a cracker to me - if I was in the market for a used BEC I'd defo have a look. Only way to know is get yerself over the border!

But my opinion is worth little - ask Chris or Mark at MNR if they know of it's history.

And you're about an hour from MNR themselves, so another plus point

[Edited on 27/6/14 by kingster996]