Board logo

Why ?
Jon Ison - 20/4/12 at 05:51 PM

Why is it ?

I decided to change the front discs, straightforward simple job but......

I now have both front uprights hung up with fresh paint drying, two new top ball joints waiting to be fitted, both cycle wings off and two new ones on the way, thought I better stop at that but why ? I only wanted to change the discs n pads.

A one hours job as now turned into a weekend project, I also blame the weather if the sun was out I wouldn't have touched it.


ali f27 - 20/4/12 at 06:02 PM

Know the feeling


steve m - 20/4/12 at 06:15 PM

That fits my world at the moment as well !
I have done a 5 min job that taken 4 days, to rectify

and its still not finished, and im back to work tomorrow, so waits for next days off


chrisxr2 - 20/4/12 at 06:21 PM

Mines gets maintenance to keep it fit for the road, other than that it gets driven, none of this constant modding lark


tandi - 20/4/12 at 08:18 PM

I took the engine out to give to a mate to rebuild and though if I took a few more bits off I could do a little more maintenance. I know have loads of bits hanging around the garage and the car is completely stripped from the windscreen forward! :-)