Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Chinese Tig Repair
RichardK

posted on 25/2/11 at 08:35 PM Reply With Quote
Chinese Tig Repair

Some of you may know I bought a chinese tig off the bay from a reputable seller and the bloody thing wouldn't weld in ac mode, welded loverly in dc mode though, thought it was me just me being crap, however at the same time I bought a tig welding starter kit from Mike at Cut40.com so when I ran into trouble I dropped him a quick email as I'd read from his website that he also repaired too.

Anyway to cut a long story short, went over to see him tonight and what a great fella, he's trying to build a business with integrity too which seems to be rare in this day and age, he's got all the kit to test a repair electickery stuff with lots of toys in, he even let me have a play with a plasma cutter and then sat me down and showed me how to set up my tig and weld properly, unfortunately my tig needs a part, one of the boards is duff so I'm trying to get the seller to pay for it so he doesn't have to take it back and refund me, he doesn't have another to swap.

Even though its been a bit of a pi55er being sold a knackered tig, I've had a good day and learned lots and the worse case scenario is, it'll cost me £80 to get it fixed (and modified to improve it, he helps develop them too) (I did buy it for about a ton cheaper than anywhere else so not really going to be out of pocket, just not the bargain I thought I'd got)

So, if you've got a chinese welder thats not working, it maybe worth dropping him an email via his website, I won't link his email here as he'll probably get spammed to death, think he may have a specialism in the ones pictured on his site, mines a wsme200 (I think) but he maybe able to help with others, he has a fixed price repair of £80 and £20 for carriage so seems like a reasonably deal to me to get a tig working the best it can with a bit of warranty too.

He's also thinking about running half day courses, something like "tig for twats" (I think I should do his marketing!!) where newbies bring down there own tig, he helps set them up, mods them if necessary and the a few hours tuition by a proper tutor, its a way away for me but I'm pretty sure I'd make the effort although would depend a lot on how much it cost of course.

No connection other than an impressed customer, i,ll be even more impressed if he fixes the bugger

Cheers

Rich





Gallery updated 11/01/2011

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
andrew-theasby

posted on 25/2/11 at 08:47 PM Reply With Quote
Where abouts is he? Presumably knaresborough area? Id also be interested in a bit of proper tuition if hes fairly local and depending on cost
View User's Profile E-Mail User View All Posts By User U2U Member
RichardK

posted on 25/2/11 at 08:53 PM Reply With Quote
Nottingham area, so a couple of hours away, saying that if there was a few of us we could meet up somewhere and go down it one ??

I think it would be worth it though...

R





Gallery updated 11/01/2011

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
andrew-theasby

posted on 25/2/11 at 09:13 PM Reply With Quote
Possibly, im surprised there isnt somewhere in York, ive looked before but never found anywhere.
View User's Profile E-Mail User View All Posts By User U2U Member
balidey

posted on 25/2/11 at 09:16 PM Reply With Quote
quote:
Originally posted by RichardK
half day courses, something like "tig for twats" (I think I should do his marketing!!)

I would so love that to become a recognised qualification. Put that on my CV, as I already have 'CAD for cocks'

View User's Profile View All Posts By User U2U Member
dhutch

posted on 25/2/11 at 11:08 PM Reply With Quote
quote:
Originally posted by RichardK"tig for twats" a few hours tuition

Even im tempted by that, i dont have a Tig set or any real need for it, but notts ist only 50minutes away. He doesnt do 'mig for mugs' as well does he?

View User's Profile E-Mail User View All Posts By User U2U Member
RichardK

posted on 25/2/11 at 11:26 PM Reply With Quote
Maybe, the geezer that will be running the course is a mate of his but he's also a college tutor on welding so may well do, that only leaves arc for ??

[Edited on 25/2/11 by RichardK]





Gallery updated 11/01/2011

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mcs

posted on 26/2/11 at 07:12 AM Reply With Quote
Hi Guys, Thanks for interest in the welding courses and the marketing comments (I think) I will do some work to see how cheap we can do them for (yes, we don't like spending money, ours or other peoples) and post something on the website. We should be able to provide all types of electric welding although we dont have any gas equipment. Barry is a Professional Welding and Fabrication lecturer and is a very helpful guy. The first course of Barry's I attended was "Welding for Wan..rs"so you should all feel at home.

Mike

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
paulbeyer

posted on 26/2/11 at 10:04 AM Reply With Quote
I posted on this site about my TIG welder needing repair and Mike at Cut40.com contacted me saying he might be able to help. I have never been a customer of his but he could not have been more helpful in trying to sort out my welder. I live in Bristol so to save on courier costs or me traveling up to Nottingham Mike suggested that, if I was confident / competent enough I could try some of the tests he would carry out to diagnose the problem and keep reporting back to him via email. I have had Mike contact me during office hours, evenings and even weekends with suggestions and what to test next.
I have some things to test today and it may be that the set will still need to be sent to Mike in the end but he is doing all he can to diagnose the problem remotely for me.
Many of us are interested in Chinese welders and plasma cutters as they are within our hobbyist budgets but we are aware of the risks we take with regard to quality and support. As Mike explained to me his company import Chinese equipment and improve upon it to provide a better quality product with UK warranty and support. If I was in the market for a new welder or plasma cutter I wouldn't hesitate to contact Cut40.com as I have already experienced their customer service and it is exceptional.
Well done Cut40.com and keep up the good work.





7 out of 10 people suffer with hemorrhoids. Does that mean the other 3 enjoy them?

View User's Profile View All Posts By User U2U Member
dhutch

posted on 1/3/11 at 11:16 PM Reply With Quote
quote:
Originally posted by RichardKThat leaves arc for ??
Our souls...

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.