Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: FOR SALE: EVERYTHING inc. ZX12 engine, wheels+R888's, MK bodywork
eznfrank

posted on 29/6/11 at 10:20 AM Reply With Quote
FOR SALE: EVERYTHING inc. ZX12 engine, wheels+R888's, MK bodywork

EDIT - NB. If you've sent me a message or responded on here I'll respond properly tonight - I've been completely inundated with requests a few of which are for the same part so will respond to all queries this evening

i was going to do this in dribs and drabs but seems a bit pointless. For personal reasons I have decided to discontinue my build and strip the car back for parts so I have lots for sale. I will elaborate further when I get a minute but parts and prices as follows:

EDIT - On the smaller bits and pieces where postage is only a few quid I'l include that in the price. The bigger bits will either be collect only or I could deliver dependant on location

ZX12 A1 Engine with shortened sump and modified pickup, includes ECU, regulator and a modified engine only loom. The loom has had all the lights etc stripped out, the loom was modded by me and does work but I have to admit it's not the best wiring. I can include a very clear copy of the wiring diagram. Also includes ignition barrel with two keys, avoiding need for resistors etc. The engine was sourced from Malc at Yorkshire engines and from memory has 2300 miles on it. Looking for 1450

Ceramic coated steel manifold made by S&S headers in the states. Made for a ZX12 but IIRC would fit R1 and Gixxer, but will need to check. Includes collector. 250 (cost closer to 500 with import duty from US) these are not your average manifold

Power Commander III for above 125

Clocks for the above with a custom one-off ali fascia made by Martin Keenan - 130


75mm ITG filter and baseplate for the above 70. Could use basplate as template to adapt to fit most BEC's

Prop adaptor for zx12 35

Wheels & tyres. Set of black multi spoke 15" alloys with SG compound R888's. Brand of wheel TBC. Have been fitted and slight paint rubbed off around wheel nut holes. Never used other than wheeling in and out of the garage. 500

Ali Petrol tank made by MK, with swirl pot and & ZX12 fuel pump. I would sell these seperate but the tank was made specifically for this pump. 175

Seats - 2 fibreglass triton style (not triton AFAIK) seats. Both in decent condition although slight usually swirling and light scrathes. Have been loosely trimmed with U trim on the edges but would need to be made permanent for IVA I guess. 160

Prop modified by MK, will check length tonight 60 - Provisionally sold

3.62 LSD Sierra 7" Diff, bolt on type 150 - SOLD

Bolt on driveshafts to match Diff above 70 - SOLD

Pair of Sierra front hubs, bought as brand new, never been used other than pushing backwards and forwards. reamed by MK 70 - SOLD

Rear Sierra hubs with new bearings and races 30 - SOLD

Front and rear Sierra calipers & discs. Calipers have been re-manufactured by Bigg red and have a red polymer coating. Will double check fitting tonight but believe fronts are XR4i vented and rears are xr4x4 solid. 140 - Provisionally sold

MK Nose cone in black, has been fitted and had indicators on it on the circle flat spots. Slight scuff on upper lead edge 70 - Provisionally sold

MK Bonnet with bulge in black, has been fitted and had the rear bonnet clips drilled out, plus two small holes near OSF bonnet clip. Bulge opening has been meshed. 80

13" Mountney steering wheel, with a free Sierra steering wheel thrown in to get you through IVA. Can include boss adaptor for the Mountney, and horn adaptor. 45

Modified steering column to suit MK 30 - Provisionally sold

modified Steering rack to suit MK (modified by MK) 30 - Provisionally sold

MK Reverse box, ring gear, cable and button. Never used 250

Full set of MK Wishbones 100 - SOLD

other bits and pieces I will put a price on asap but feel free to make an offer in the mean time.

Speedo healer - SOLD
Acumen gear indicator - SOLD
Battery
MK gear linkage inc. turned Ali knob - provisionally sold
Interior panels
throttle cable
Clutch cable from MAC - SOLD
Front Cycle wings in black
Rear arches in black - have been cut for lights and have orange oval indicators sikaflex'd into them
Bonnet catches - SOLD
Sierra Handbrake -SOLD
Leather look handbrake gaitor and chrome surround
Tonneau cover for MK with roll bar without back stays
Scuttle - Provisionally sold
Shocks and springs - will check brand but the standard ones that come with MK - SOLD
rear MK Uprights - SOLD
Immobiliser
handbrake cable
CBS Wiring module and cover
Fan


[Edited on 1/7/11 by eznfrank]

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
neilp1

posted on 29/6/11 at 10:35 AM Reply With Quote
u2u handbrake gaitor, handbrake cable, throttle cable and fan
View User's Profile View All Posts By User U2U Member
wylliezx9r

posted on 29/6/11 at 10:35 AM Reply With Quote
u2u sent





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
welderman

posted on 29/6/11 at 11:18 AM Reply With Quote
interested in

Speedo healer
Acumen gear indicator
Battery
throttle cable
Clutch cable from MAC
Bonnet catches
Sierra Handbrake
handbrake cable





Thank's, Joe

I don't stalk people


http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301

Back on with the Fisher Fury R1

View User's Profile Visit User's Homepage View All Posts By User U2U Member
jossey

posted on 29/6/11 at 11:48 AM Reply With Quote
handbrake
Prop if right length or close :O)
wishbones if they fit my locost :O)

cheers





Thanks



David Johnson

Building my tiger avon slowly but surely.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member This User Has MSN Messenger
Hellfire

posted on 29/6/11 at 11:57 AM Reply With Quote
Aaron, sorry to see you're selling up mate.

Interested in Sierra Calipers and discs, both front & rear.

Phil

[Edited on 29-6-11 by Hellfire]






View User's Profile Visit User's Homepage View All Posts By User U2U Member
hobzy

posted on 29/6/11 at 12:00 PM Reply With Quote
VERY interested in the wheels/tyres but am way down south.
Do you have a pic of one of the wheels so I can see the design please?






View User's Profile View All Posts By User U2U Member
mcerd1

posted on 29/6/11 at 12:05 PM Reply With Quote
quote:
Originally posted by eznfrank
Front and rear Sierra calipers & discs. Calipers have been re-manufactured by Bigg red and have a red polymer coating. Will double check fitting tonight but believe fronts are XR4i vented and rears are xr4x4 solid. 140

sounds like the same ones I've got...

the fronts should be 260mm vented (XR4i or 2.0 ABS discs should be right for normal sierra hubs)

the rears should be 253mm solid dics (XR4i, 2.0 ABS or XR4x4 discs should suit)


these are also the same brakes used by mk3 granada's, but with 5 stud discs

[Edited on 29/6/2011 by mcerd1]





- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

View User's Profile View All Posts By User U2U Member
Hellfire

posted on 29/6/11 at 12:06 PM Reply With Quote
quote:
Originally posted by hobzy
VERY interested in the wheels/tyres but am way down south.
Do you have a pic of one of the wheels so I can see the design please?


If you're interested, I can get them from Leeds down to Junction 27 of the M1. LCB courier stylee..........

Phil






View User's Profile Visit User's Homepage View All Posts By User U2U Member
Doctor Derek Doctors

posted on 29/6/11 at 01:09 PM Reply With Quote
U2U sent regarding the Nose Cone, Scuttle and Steering Column





Designer and Supplier of the T89 Designs - Single Seater Locost. Build you own Single Seater Racecar for ~5k.

Plans and Drawings available, U2U or e-mail for details.

Available Now: The Sports Racer Add-On pack, Build a full bodied Sports Racer for Trackdays, Sprints and Racing.



www.t89.co.uk
www.racecarwings.co.uk

callan@t89.co.uk

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
cloudy

posted on 29/6/11 at 01:16 PM Reply With Quote
Interested in wheels an tyres - pending a photo or model





www.warnercars.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
eznfrank

posted on 29/6/11 at 01:29 PM Reply With Quote
Hi mate, here is a not very good photo of the wheels and tyres, can get a better one off home PC tonight

https://www.facebook.com/photo.php?pid=4790723&l=6a52bd7794&id=573426945

View User's Profile View All Posts By User U2U Member
hucky

posted on 29/6/11 at 01:59 PM Reply With Quote
u2u sent in reguards to suspension
View User's Profile View All Posts By User U2U Member This User Has MSN Messenger
brookie

posted on 29/6/11 at 03:41 PM Reply With Quote
intrested in the Acumen gear indicator
View User's Profile View All Posts By User U2U Member
pekwah1

posted on 29/6/11 at 04:06 PM Reply With Quote
u2u regarding seats!
View User's Profile E-Mail User View All Posts By User U2U Member
hobzy

posted on 29/6/11 at 04:08 PM Reply With Quote
Thanks for the pic, let cloudy have first dibs as I'd have to paint out the red stripe and wont have the cash for a couple of weeks it seems.






View User's Profile View All Posts By User U2U Member
eznfrank

posted on 29/6/11 at 06:26 PM Reply With Quote
Photo of alloys


and seats




[Edited on 29/6/11 by eznfrank]

View User's Profile View All Posts By User U2U Member
gaz_gaz

posted on 29/6/11 at 07:44 PM Reply With Quote
quote:
Originally posted by Hellfire
quote:
Originally posted by hobzy
VERY interested in the wheels/tyres but am way down south.
Do you have a pic of one of the wheels so I can see the design please?


If you're interested, I can get them from Leeds down to Junction 27 of the M1. LCB courier stylee..........

Phil


and i could get them from J27 of the M1 down to Sussex if it helped at all,



also sent the op a u2u

View User's Profile View All Posts By User U2U Member
davestarck

posted on 29/6/11 at 08:38 PM Reply With Quote
U2U regarding tonneau cover
View User's Profile View All Posts By User U2U Member
blakep82

posted on 30/6/11 at 09:00 AM Reply With Quote
what type of immobiliser is it?





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
james h

posted on 30/6/11 at 02:39 PM Reply With Quote
u2u re: rear uprights and set of wishbones

James

View User's Profile Visit User's Homepage View All Posts By User U2U Member
dibble10

posted on 1/7/11 at 09:54 AM Reply With Quote
Hi

Can you give me a price for the full zx12 setup - engine, loom, clocks, prop adapter etc.....

Thanks





893cc Blade Engined 7 style.......thinking of ZZR1400 transplant???

View User's Profile View All Posts By User U2U Member
RK

posted on 2/7/11 at 01:02 AM Reply With Quote
Do you have a dash blank?
Also interested in the immobiliser.

View User's Profile View All Posts By User U2U Member
DRC INDY 7

posted on 2/7/11 at 06:16 AM Reply With Quote
U2U regarding tonneau cover

also can i see a picture


Cheers Dale

View User's Profile Visit User's Homepage View All Posts By User U2U Member
FatChapChipChop

posted on 2/7/11 at 11:56 AM Reply With Quote
U2U sent - Fuel Tank





Drive fast, don't look back!

View User's Profile E-Mail User View All Posts By User U2U Member This User Has MSN Messenger
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.