Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Discovery 4 bush size RGX500211
TPG

posted on 19/5/15 at 06:45 PM Reply With Quote
Discovery 4 bush size RGX500211

I am identifying poly bushes suitable to replace knackered old rubber ones currently in residence.

1 bush
1 bush


2 bush
2 bush


..and they live here

mount
mount


I "THINK" that Disco 4 Rear Lower Wishbone Front Bush RGX500211 are the way to go. So, the title and reason for the post:does anyone have access to one to measure it please? Just the basics please. I will be hopefully getting a Powerflex PFR32-410 jobbies

powerflex
powerflex


...not had much help from Floflex it must be said. Anyway, I can/will make a new insert to suit and /or sleeve where it fits so that isn't an issue. If I have the size of the original bush I can check my meanderings and thoughts.
Thanks in advance.





..Which was nice..

View User's Profile View All Posts By User U2U Member
mark chandler

posted on 19/5/15 at 07:47 PM Reply With Quote
Sharp tool and poly bushes lathe down very nicely, I used landrovers panhard rod bushes for my engine mounts.
View User's Profile View All Posts By User U2U Member
TPG

posted on 19/5/15 at 08:26 PM Reply With Quote
Cheers Mark. I will be modding the bushes for sure. I just want to double check make sure there is enough of the bush to work with.





..Which was nice..

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.