Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: ST170 RWD Conversion Which Flywheel Bolts
Barksavon

posted on 3/6/20 at 09:01 PM Reply With Quote
ST170 RWD Conversion Which Flywheel Bolts

Hi can anyone tell me which flywheel bolts I need to buy for my rwd conversion.
It's a ST170 engine with a standard Zetec flywheel mated to a Type 9 gearbox.
I'm thinking a set of standard bolts will be ok as I'm not now using the dual mass flywheel...but would appreciate confirmation.
Thanks
Ian

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 4/6/20 at 05:18 AM Reply With Quote
Standard Zetec bolts or Arp Zetec bolts.

If really on the cheap then trim the st bolts.
They are to long as standard and will lock the crank up

View User's Profile View All Posts By User U2U Member
SJ

posted on 4/6/20 at 06:38 AM Reply With Quote
I bought ARP. Can't for the life of me remember why - they cost as much as my Engine!
View User's Profile View All Posts By User U2U Member
Barksavon

posted on 5/6/20 at 05:10 PM Reply With Quote
Thankyou
Ian

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.