Irony
|
| posted on 7/4/16 at 10:48 AM |
|
|
 
Description
|
|
|
|
|
james h
|
| posted on 7/4/16 at 08:02 PM |
|
|
quote:
Originally posted by johnemms
Its a speedo & rev counter
 
Description
Velona Link..
Glowshift Gauges
My main speedo does not have an odometer that records total mileage for mot/insurance etc.
Regular Type 9 electronic drive runs both speedos.
(can switch it off at night or if you do not want to record total mileage)
Drive at 40mph ..press set.. done.. easy peasy 
Programable RPM 0-20000 Min 10 rpm
Speedo 0-250 mph or km/h
DC 9-16v (12v regular)
Conect to OEM sensor
Stainlesss or Black
[Edited on 29/3/16 by johnemms]
Thanks for that!
|
|
|
Mash
|
| posted on 27/7/16 at 05:54 PM |
|
|
Work in progress but it's getting there:
[img]
 
new dash test fit
[/img]
|
|
|
swanny
|
| posted on 16/7/18 at 02:51 PM |
|
|
The OEM dials on my old Robin Hood
 
Description
|
|
|
jps
|
| posted on 16/2/20 at 10:26 AM |
|
|
Great thread, just looking through for inspiration as I cut out the sheet for what will become my dash panel. I had planned bare aluminium, now
wondering if it will be too reflective as commented elsewhere on this thread.
|
|
|
sammini7
|
| posted on 18/4/20 at 12:58 PM |
|
|
Here is a picture of me and my dads mockup dash in our kit car build housing a Honda S2000 AP1 dash, just doing my research on how to install some
2011 Caterham Superlight 'Rage' switches #migraine 
[Edited on 18/4/20 by sammini7]
[Edited on 18/4/20 by sammini7]
|
|
|
Stuart Walker
|
| posted on 18/10/20 at 09:40 PM |
|
|
This thread is great, some great work on show
Here's my first dash mock-up. Currently in lightweight laminated cellulose board, soon to be in matt black plywood.
Any thoughts from anyone with their car on the road? I know lots have gone for the centre speedo, but is it annoying in practice?
I also wondered if anyone has up-to-date info on whether using instrument lights as a "lights on" warning is OK instead of an actual
warning light (got the main beam one built into the speedo).
Cheers,
Stu
 Dash
with wheel by Stuart Walker, on Flickr
[Edited on 18/10/20 by Stuart Walker]
|
|
|
JC
|
| posted on 19/10/20 at 04:25 AM |
|
|
Here's my dash after its lockdown revamp!
 
Description
|
|
|
simon04
|
| posted on 1/4/21 at 04:48 PM |
|
|
Heres my Raw Striker Dash with ETB instruments.
|
|
|
roadrunner
|
| posted on 1/4/21 at 11:36 PM |
|
|
?????
|
|
|
simon04
|
| posted on 16/4/21 at 05:24 PM |
|
|
Well that didnt go as planned
how do i post my pics on here then??
|
|
|
Toys2
|
| posted on 16/4/21 at 05:54 PM |
|
|
quote:
Originally posted by simon04
Well that didnt go as planned
how do i post my pics on here then??
Go you your photo archive and copy the forum code, past it here
 
striker 2
If you hit "Quote" on my post, you'll see what I pasted
[Edited on 16/4/21 by Toys2]
|
|
|
rontyler
|
| posted on 24/8/21 at 10:27 PM |
|
|
Still a lot to do but the instrument panel is essentially complete...
 
Description
 
Description
 
Description
Regards, Ron Tyler
"Nothing is ever accomplished by a reasonable man."
|
|
|
DavSki153
|
| posted on 26/8/21 at 07:51 AM |
|
|
That's looking great Ron! Have you flocked that dash or used a different material?
|
|
|
rontyler
|
| posted on 26/8/21 at 12:52 PM |
|
|
quote:
Originally posted by DavSki153
That's looking great Ron! Have you flocked that dash or used a different material?
Thanks! I used Harley Davidson "Texture Black" spray paint. Its a very fine texture appearing a bit like sand when it dries, but goes on
like any normal spray paint. Hard to capture in a photo, but looks nice in person.
Regards, Ron Tyler
"Nothing is ever accomplished by a reasonable man."
|
|
|
