Board logo

Seats and ARP Zetec (ST170) Rod Bolts
Shandylegs - 3/7/16 at 03:33 PM

In process of moving units so clearing out some bits I'm not going to use in the near future.

Set of 9mm ARP rod bolts for a Ford Zetec - Part number 151 -6005 (Believe ST170 variant as standard bolts are 8mm). New and unused but grease sachet split so packaging is a bit of a mess! - £25





Pair of low back seats, originally bought for my MG Midget but they were a little snug for my lard ar*e so I reused the originals. Again, unused, but they have been sat in my unit for a couple of years so not completely new - £60. Further pictures in my photo archive (For sale section)




Happy to post out the rod bolts at cost but seats will have to be collected - S75 (Barnsley)


big_wasa - 3/7/16 at 04:25 PM

If the rod bolts are still available and you can post I will have them please.

[Edited on 3/7/16 by big_wasa]


Shandylegs - 3/7/16 at 04:46 PM

See your U2U.


i_froloshki - 14/7/16 at 01:34 PM

U2u on its way for the seats


loggyboy - 14/7/16 at 01:53 PM

quote:
Originally posted by Shandylegs
Set of 9mm ARP rod bolts for a Ford Zetec - Part number 151 -6005 (Believe ST170 variant as standard bolts are 8mm).


Indeed, Normal Zetecs (silver/blacktop) are 151-6003

[Edited on 14-7-16 by loggyboy]


Shandylegs - 14/7/16 at 02:13 PM

Thanks to everyone who expressed an interest, both items have now been sold.


Vmax1974 - 14/7/16 at 04:19 PM

Damit fancied the seats and am in barnsley for geek fest at the weekend too

Ah well too slow