Board logo

Looking for Dallara rear adjustable ARB
MadMaxx - 2/5/17 at 11:56 AM

Hi,

someone has a spare Dallara rear adjustable ARB like this one :

https://youtu.be/gL52K9WGzoI

that would be happy to sell? Or knows where I can find one?

Maxx

[Edited on 2/5/17 by MadMaxx]

jeffw - 2/5/17 at 03:20 PM

I got mine from US Ebay.

MadMaxx - 2/5/17 at 03:33 PM

It's 3 months I'm surfing on US ebay looking for that ARB, but untill now no adv found. The advantage is that you can adjust it from the cockpit and the softest position is like not having it. Did you appreciate the difference between with and without? Any suggestion on which site follow to wait the right adv?

[Edited on 2/5/17 by MadMaxx]

pewe - 2/5/17 at 03:50 PM

Have you thought of contacting Dallara in Varano de' Melegari direct?
Or have a drive down there to ask - there are lots of small supplier companies around there.
HTH.
Cheers, Pewe

MadMaxx - 2/5/17 at 03:58 PM

Yes, I did, but they offered me a simplest T bar ARB, so now I have to decide how to go on with the rebuilding of the Fury chassis that is only waiting the attachment for ARB to be finished and go to sand blasting and painting.

MadMaxx - 5/5/17 at 09:57 AM

I better investigated about the matter with Dallara spare parts manager: the adjustable rear ARB

https://youtu.be/gL52K9WGzoI

is not manufactured by them, but there is a local manufacturer in USA supplying it to the Indy car Teams. Someone has useful information about it?

[Edited on 5/5/17 by MadMaxx]

MadMaxx - 26/8/17 at 03:08 PM

quote:
Originally posted by jeffw
I got mine from US Ebay.


Still not found it. Any chance to measure the main dimensions and draw a sketch to replicate it by myself?

Kdempsie - 26/8/17 at 04:14 PM

This might help.

I bought one like this but I don't remember if it cost as much as this one.

http://www.2040-parts.com/indycar-sway-anti-roll-bar-assembly-1-190-arb-irl-indy-500-formula-car-i2079147/

Keith.

jeffw - 27/8/17 at 06:57 AM

quote:
Originally posted by MadMaxx

Still not found it. Any chance to measure the main dimensions and draw a sketch to replicate it by myself?


That really isn't going to work. It is a complicated piece of engineering and it would involve taking it off the car and making a CAD drawing but even then you will not have the bearings sizes or the material dimensions of the blade.

MadMaxx - 27/8/17 at 07:34 AM

quote:
Originally posted by jeffw
quote:
Originally posted by MadMaxx

Still not found it. Any chance to measure the main dimensions and draw a sketch to replicate it by myself?


That really isn't going to work. It is a complicated piece of engineering and it would involve taking it off the car and making a CAD drawing but even then you will not have the bearings sizes or the material dimensions of the blade.


It's a pity not have the chance to buy or replicate it because it is the only ARB that has the ability to be completely disengaged and gradually inserted by adjusting it from the passenger compartment. It is also very compact, lightweight and easy to install near the center of gravity of the car.