Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Air Compressors
DixieTheKid

posted on 28/1/12 at 01:29 PM Reply With Quote
Air Compressors

Hi all,

Looking for some info in air compressors, i dont own one but want to so i guess im after some buying tips. I found this one one ebay that looks cheap.

AIR COMPRESSOR 200 LTR NEW c/w WARRANTY | eBay

Regards Chris

[Edited on 28/1/12 by DixieTheKid]






COS IT'S Worth IT

View User's Profile View All Posts By User U2U Member
slingshot2000

posted on 28/1/12 at 01:36 PM Reply With Quote
The description is a little vague;

VOLTS 240

and two line down

POWER 3PH 2200WATT


I think I would be asking exactly what electrical supply is required, unless you have a 3 phase supply.

Regards
Jon

View User's Profile E-Mail User View All Posts By User U2U Member
AndyW

posted on 28/1/12 at 01:42 PM Reply With Quote
quote:
Originally posted by slingshot2000
The description is a little vague;

VOLTS 240

and two line down

POWER 3PH 2200WATT


I think I would be asking exactly what electrical supply is required, unless you have a 3 phase supply.

Regards
Jon


two lines down does it not say 3HP 2200WATT? I would assume its a 3 HORSE POWER 2200 WATT

you can also see the 3 pin power plug in the picture

View User's Profile View All Posts By User U2U Member
DixieTheKid

posted on 28/1/12 at 01:44 PM Reply With Quote
I want to be able to spray with it, as well as using impact guns etc. I am told 200l is a good size, would you agree?

[Edited on 28/1/12 by DixieTheKid]






COS IT'S Worth IT

View User's Profile View All Posts By User U2U Member
fazerruss

posted on 28/1/12 at 01:47 PM Reply With Quote
quote:
Originally posted by slingshot2000
The description is a little vague;

VOLTS 240

and two line down

POWER 3PH 2200WATT


I think I would be asking exactly what electrical supply is required, unless you have a 3 phase supply.

Regards
Jon


No it says 3hp (3 horse power) not 3ph (3 phase) and there is 750w to an horse so 2200w is about right.
i wouldnt go for a 200 litre tank with that size pump and motor as it will take forever to reach a decent working pressure.
Ideally that compressor would suit a 50 litre tank which is good for most jobs.





"if assholes could fly this place would be an airport"

View User's Profile View All Posts By User U2U Member
DixieTheKid

posted on 28/1/12 at 01:49 PM Reply With Quote
Ok so may be 200L is to big from me. See i dont know anything about pump and motor sizes vs tank size. What should i be looking for?






COS IT'S Worth IT

View User's Profile View All Posts By User U2U Member
fazerruss

posted on 28/1/12 at 01:58 PM Reply With Quote
Ive had a clarke airmaster for nearly 20 years. 3hp motor,14cfm and 50 litre tank. It does all the jobs you list no probs.
I would run it off a 30amp supply cause the start up current on any single phase compressor can trip the fuse.





"if assholes could fly this place would be an airport"

View User's Profile View All Posts By User U2U Member
theconrodkid

posted on 28/1/12 at 02:02 PM Reply With Quote
BURISCH Air compressor 2.5HP 50L Upright vertical 50 litre 220v | eBay

takes up less floor space and has TUV





who cares who wins
pass the pork pies

View User's Profile E-Mail User View All Posts By User U2U Member
big_wasa

posted on 28/1/12 at 02:05 PM Reply With Quote
50L + and 3hp is where you want to be. Mine is 100L and 3hp and the only thing it finds hard going is sand blasting.
View User's Profile View All Posts By User U2U Member
fazerruss

posted on 28/1/12 at 02:19 PM Reply With Quote
Heres mine

Description
Description


and it runs the sand blast cabinet aswell.

I wouldnt recomend clarke now though cos its all the same shite made in china with a different sticker and an inflated price from machine mart.





"if assholes could fly this place would be an airport"

View User's Profile View All Posts By User U2U Member
bonzoronnie

posted on 28/1/12 at 02:35 PM Reply With Quote
I have just bought one of these Burich compressors

BURISCH Air Compressor 3HP 90L Belt Drive Twin 14CFM Twin Cylinder | eBay

Arrived next day & I am delighted with the quality & performance

I needed a replacement for my tiny portable as I seldom find it worthwhile firing up the big boy that lives up in the shed

Looking at the similar Machine Mart offering they look to be almost identical as the Burisch but cost nearly double the money

View User's Profile View All Posts By User U2U Member
slingshot2000

posted on 28/1/12 at 02:40 PM Reply With Quote
quote:
Originally posted by AndyW
quote:
Originally posted by slingshot2000
The description is a little vague;

VOLTS 240

and two line down

POWER 3PH 2200WATT


I think I would be asking exactly what electrical supply is required, unless you have a 3 phase supply.

Regards
Jon


two lines down does it not say 3HP 2200WATT? I would assume its a 3 HORSE POWER 2200 WATT

you can also see the 3 pin power plug in the picture



Whoops, my mistake !

View User's Profile E-Mail User View All Posts By User U2U Member
DixieTheKid

posted on 28/1/12 at 02:58 PM Reply With Quote
quote:
Originally posted by bonzoronnie
I have just bought one of these Burich compressors

BURISCH Air Compressor 3HP 90L Belt Drive Twin 14CFM Twin Cylinder | eBay

Arrived next day & I am delighted with the quality & performance

I needed a replacement for my tiny portable as I seldom find it worthwhile firing up the big boy that lives up in the shed

Looking at the similar Machine Mart offering they look to be almost identical as the Burisch but cost nearly double the money


That looks a good option! Thanks.






COS IT'S Worth IT

View User's Profile View All Posts By User U2U Member
sdh2903

posted on 28/1/12 at 03:18 PM Reply With Quote
Hi, I got a 100L sealey 3hp compressor from this guy on ebay:

http://stores.ebay.co.uk/Recontooling-for-nearly-new-Sealey?_rdc=1

I got a red version of the black one he has listed which has a slightly higher output for around 190 delivered and its been great so far.

I've had a few things from him now and if your after something specific that isn't listed just drop him a message and he will see what he can do. A really helpful bloke.

steve

View User's Profile View All Posts By User U2U Member
Bare

posted on 28/1/12 at 07:07 PM Reply With Quote
Critical Spec on Any compressor is the CFM at a specific pressure. No CFM rating = No Buy :-)
IMO you need 4/6 cfm at 90 psi for light (typical) DIY work and 17 to 23 CFM for ANY sandblasting cabinet..
Unless you want to be at it for the entire day.
Duty cycles etc are another real consideration But the CFM is foremost.

[Edited on 28/1/12 by Bare]

View User's Profile E-Mail User View All Posts By User U2U Member
bonzoronnie

posted on 28/1/12 at 07:31 PM Reply With Quote
CFM is only a measurement of how much air a compressor will shift over a given period of time ( Cubic Feet per Min )
Might be able to shift a lot of air but CFM not a true indication of how well the compressor performs.

A true guide of a compressors ability is its FAD output ( Free Air Delivery )

Loads of manufacturers of non industrial compressors do not reveal the FAD output of their products.

All that aside, the Burisch compressor will provide enough air to power rattle guns, spray guns & the likes .

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.