Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: What ali corner angle to trim tranny tunnel?
mikeb

posted on 10/3/15 at 12:23 PM Reply With Quote
What ali corner angle to trim tranny tunnel?

Can anyone provide a link for some ali angle with a nice radius edge to trim my transmission tunnel. I can only seem to find square edge with uneven dimensions.
View User's Profile View All Posts By User U2U Member
RichardK

posted on 10/3/15 at 12:36 PM Reply With Quote
seem to remember getting mine from a website that supplied stuff for horse trailers..

will look

cheers

rich





Gallery updated 11/01/2011

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
40inches

posted on 10/3/15 at 12:49 PM Reply With Quote
I used ClickMetal for all my mouldings. ClickMetal
View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 10/3/15 at 01:44 PM Reply With Quote
IIRC I used cope moulding #10, (from that ClickMetal data sheet).





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member
snapper

posted on 10/3/15 at 03:54 PM Reply With Quote
My windscreen surround was to sharp so I rough filed a radius then sanded the polished
It was easy and relatively quick





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
renetom

posted on 10/3/15 at 04:41 PM Reply With Quote
Hi
We used aly kitchen worktop end trims
& stainless flange head screws

interior
interior

View User's Profile E-Mail User View All Posts By User U2U Member
rdodger

posted on 10/3/15 at 06:41 PM Reply With Quote
I got mine from here

http://www.aluminiumwarehouse.co.uk/Aluminium-Mouldings-Cope/c120_1825_1827/index.html

Good choice

I went with AWCP1011

Easy enough to bend both ways.


[img][/img]






View User's Profile View All Posts By User U2U Member
davidimurray

posted on 10/3/15 at 08:29 PM Reply With Quote
I used some wooden 'angle' for Wickes and painted it black

Description
Description






Gallery 1 http://www.facebook.com/media/set/?set=a.116893465324.130778.601005324
Gallery 2 http://www.facebook.com/media/set/?set=a.245243755324.181913.601005324&l=a9831a9319
Gallery 3 http://www.facebook.com/media/set/?set=a.440671625324.232627.601005324&l=3f0d42c523
Gallery 4 http://www.facebook.com/media/set/?set=a.490098255324.297598.601005324&l=efb083b7df
Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5cd3a
Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=3&l=fe779b358c
Duratec Engine Swap https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f " target="_blank"> https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f

View User's Profile View All Posts By User U2U Member
mikeb

posted on 11/3/15 at 02:24 PM Reply With Quote
Thanks all some good tips!
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.