Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: The mythical oyster or other beading tool
sdh2903

posted on 9/12/16 at 10:56 AM Reply With Quote
The mythical oyster or other beading tool

Hi all.

I have a couple of ally pipes I need to put a bead on and was wondering if anyone had one of the mythical oyster tools or a n other beading tool which they wish to flog or lend out in return for some beer tokens?

Cheers
Steve

View User's Profile View All Posts By User U2U Member
sprintB+

posted on 9/12/16 at 11:13 AM Reply With Quote
local sheet metal worker should have them.
View User's Profile View All Posts By User U2U Member
MikeR

posted on 9/12/16 at 12:48 PM Reply With Quote
Why are they mythical?

https://www.bes.co.uk/products/152.asp - bottom of the page, part number 16909

View User's Profile View All Posts By User U2U Member
sdh2903

posted on 9/12/16 at 12:54 PM Reply With Quote
Cheers Mike. I'd been searching for oyster tool rather than oyster pliers! I know they no longer exist at b and q anymore hence the mythical label
View User's Profile View All Posts By User U2U Member
theprisioner

posted on 9/12/16 at 01:57 PM Reply With Quote
What internal size?





http://sylvabuild.blogspot.com/

http://austin7special.blogspot.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
sdh2903

posted on 9/12/16 at 02:07 PM Reply With Quote
63mm intercooler tubing
View User's Profile View All Posts By User U2U Member
CosKev3

posted on 9/12/16 at 05:51 PM Reply With Quote
A small bead of weld works
View User's Profile View All Posts By User U2U Member
obfripper

posted on 9/12/16 at 06:23 PM Reply With Quote
http://www.theturboforums.com/threads/350500-Vise-grip-tube-bead-roller-tool-for-only-7-83

This sort of thing will work fine if you don't want to spend a fortune on a dedicated tool, and might make use of some worn out mole grips you've already got.

Dave

View User's Profile View All Posts By User U2U Member
NigeEss

posted on 9/12/16 at 06:24 PM Reply With Quote
I also was looking for Oyster "tool" and failed so made one out of a cheap set of waterpump pliers.





Time is an illusion. Lunchtime doubly so.................Douglas Adams.

View User's Profile View All Posts By User U2U Member
sam919

posted on 9/12/16 at 06:38 PM Reply With Quote
Try one of these, the guy makes them himself. I bought one for doing all the ali cooling pipes. I went a bit mental on some heavier gauge ali tube , my fault, and wrecked. It worked for what i needed it for, must have done 20-25 beads easy enough.

Intercooler pipe beader

View User's Profile View All Posts By User U2U Member
sdh2903

posted on 9/12/16 at 06:45 PM Reply With Quote
Cheers for the info chaps. I had started to root through my drawer of semi scrap tools to see what I could cobble together. It's only 2 beads I need doing.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 9/12/16 at 06:59 PM Reply With Quote
I have a pair of the oyster pliers and they are naf. Your welcome to them but I won't get near the post office for a week or two. They have the groove filed already.


I made my self somthing much stronger to do steel pipes.




View User's Profile View All Posts By User U2U Member
40inches

posted on 9/12/16 at 07:27 PM Reply With Quote
I have done dozens of beading with Oyster pliers and found they do a good, if tedious job.
As said, they need grooving to work properly.


View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.