Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: IVA cat and tripod bearing questions
bart

posted on 3/7/18 at 12:28 PM Reply With Quote
IVA cat and tripod bearing questions

Hi All

I have tried a search but nothing found , having said that bet its been questioned before

does the cat have to be E stamped for iva , I want to use a 3" 200 cell sports cat.

Tripod question not iva

does any one have the correct positions when installing a tripod joint
I presume at rest ie: neutral lift dive ect that the joint should be half way up the travel ,but then I suppose it depends on the intrusion into the joint under dive and rise , any thoughts ? also engine movement !





BE ALERT > BRITAIN NEEDS LERTS

View User's Profile View All Posts By User U2U Member
Slimy38

posted on 3/7/18 at 01:22 PM Reply With Quote
There is no E stamp required for a catalytic converter, the 'proof of the pudding' will come when you have the car tested for emissions.

I've just had a look in the IVA manual and all I can see is that it needs to be secure, not leaking and not noisy.

View User's Profile View All Posts By User U2U Member
MikeR

posted on 3/7/18 at 01:33 PM Reply With Quote
Following as I'm interested in the tripod question
View User's Profile View All Posts By User U2U Member
bart

posted on 3/7/18 at 02:12 PM Reply With Quote
The tripod bearing question is not IVA related more of a design question.





BE ALERT > BRITAIN NEEDS LERTS

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.