Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Wanted Bt Zetec standard cams
big_wasa

posted on 4/8/20 at 08:16 AM Reply With Quote
Wanted Bt Zetec standard cams

As title, I am after a set of standard and good condition Ford cams for a Blacktop Zetec. Either 1.8 or 2.0 or even both and not to far from Spalding Lincs unless you can post please.

Thanks

View User's Profile View All Posts By User U2U Member
hughpinder

posted on 4/8/20 at 10:29 AM Reply With Quote
I have a silvertop engine sat on my drive for the past few years that will go for scrap, if the cams from that are any good? Will whip the covers off and have a look if you are interested.
View User's Profile View All Posts By User U2U Member
SJ

posted on 4/8/20 at 12:33 PM Reply With Quote
I had a set. Might have binned them though. I'll have a look.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 4/8/20 at 04:39 PM Reply With Quote
Thanks for the offer Huge but I believe the Silvertop’s are different to the Blacktop.
View User's Profile View All Posts By User U2U Member
wowblaauw

posted on 4/8/20 at 04:40 PM Reply With Quote
Hi, I have a set of BT 2.0l cams with less than 1100 miles on them. They came from my crate engine before I upgraded to Piper cams. £75 plus the ship and they are yours.

Cheers





"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"

View User's Profile View All Posts By User U2U Member
Tonesta

posted on 5/8/20 at 01:53 PM Reply With Quote
Hi Big Wasa, hope your keeping well I have a set of brand new 2.0ltr BT cams along with valve assemblies if requierd
View User's Profile View All Posts By User U2U Member
Tonesta

posted on 5/8/20 at 01:53 PM Reply With Quote
Hi Big Wasa, hope your keeping well I have a set of brand new 2.0ltr BT cams along with valve assemblies if requierd
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.