Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Locost Carver / Venture One?
akumabito

posted on 22/5/08 at 10:25 AM Reply With Quote
Locost Carver / Venture One?

Hmm, with the way fuel prices keep going up, I thought it'd be a good idea to look at vehicles that are a bit more fuel efficient, but still fun to drive. The Carver seems like a pretty good bet, but it's silly expensive. A DIY locost version would be ideal for commuting to work. Has anyone given this some thought already? Particularly the tilting mechanism, and the odd gear linkages to the engine out in the back?
View User's Profile E-Mail User View All Posts By User U2U Member
Miks15

posted on 22/5/08 at 10:32 AM Reply With Quote
i dont think the gear linkage is you main problem. Use a small capacity (for the efficiency) bike engine and box and its a very simple gear linkage. I think your biggest problem is going to be getting the tilt.
View User's Profile View All Posts By User U2U Member
tegwin

posted on 22/5/08 at 11:07 AM Reply With Quote
I dont see why the tilt mechanism cant be relativley simple...

Just use some big bearings to pivot the front from the back, and then use some hydraulic/pnemuatic cylinders to control what the tilt is doing..

Unless you can get clever and use the natural tilt of the suspension at the back to lean the front section...hmm...





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Ivan

posted on 22/5/08 at 11:25 AM Reply With Quote
Read somewhere that the Carver gets REALLY interesting in oversteer - don't suppose it knows what way to lean then






View User's Profile View All Posts By User U2U Member
akumabito

posted on 22/5/08 at 11:25 AM Reply With Quote
Well, those vehicles use an automated tilt system dependent on driver input (turn the wheel faster and it banks more). Perhaps it would be easier to just make the tilting dependent on how far you turn the wheel. A different approach would be having tilt being dependent on speed.. I think th Carver and Venture One nailed it though.. just wondering how you could replicate that..

As for powering it.. I wouldn't be looking to set any speed records. I'm thinking perhaps a small engine with CVT 'box. Perhaps a FIAT 1.1 or 1.2 engine. Should get decent mileage that way.

View User's Profile E-Mail User View All Posts By User U2U Member
David Jenkins

posted on 22/5/08 at 11:52 AM Reply With Quote
I have this vision of a 'vertical jack-knife" effect if you don't get the lean right, or the base decides to flip.

Could be exciting...






View User's Profile Visit User's Homepage View All Posts By User U2U Member
akumabito

posted on 22/5/08 at 12:39 PM Reply With Quote
No idea what it would take to convince the base to do a spontaneous flip.. at least nothing that wouldn't also be a factor in a normal light car. How often do you find a locost parked upside down? Or a Mini or Smart?

I'd be more worried about hydraulic lockup, or loss of pressure, causing the thing to lean over with no way of getting her up again. Should be interesting when cornering..

View User's Profile E-Mail User View All Posts By User U2U Member
aka Keith

posted on 22/5/08 at 04:25 PM Reply With Quote
quote:
Originally posted by Ivan
Read somewhere that the Carver gets REALLY interesting in oversteer - don't suppose it knows what way to lean then


I am sure I have seem some video of the Carver in oversteer, IIRC it did not try to right itself and the back end simply slid round.

http://uk.youtube.com/watch?v=egaPBp5nVDI

[Edited on 22/5/08 by aka Keith]






View User's Profile View All Posts By User U2U Member
akumabito

posted on 24/5/08 at 12:18 PM Reply With Quote
Any ideas on the tilt control system?
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.