Board logo

What upright is this?
sky - 25/8/13 at 11:48 PM

Hi everyone,
Sierra or Escort?


Thanks!

[Edited on 26/8/13 by sky]

rost - 26/8/13 at 06:21 AM

Definitely Sierra! With a RAW insert for the strut hole.

sky - 26/8/13 at 06:22 AM

Perfect, thanks!

jacko - 26/8/13 at 06:25 PM

Who did the welding on them wing stays I hope the chssis is welded better then them

sky - 26/8/13 at 06:34 PM

Not me

sky - 14/10/13 at 06:55 AM

Hi everyone,
I would like to swap my Sierra's uprights to the rallydesign alloy types but they'are the Cortina version. The question is: can I use on a Raw Striker Cortina's RD uprights with my wishbones without modifying something?

Thanks

[Edited on 14/10/13 by sky]

loggyboy - 14/10/13 at 08:07 AM

Basically no, IIRC al the geometry and possibly ball joints/etc are different.
However Raw do Capri based uprights which i think share some Cortina components and are similar geometry, I expect you could proabably swap to wishbones that suit those.
Best option is speak to Martin at Raw, he'll set you straight.

sky - 14/10/13 at 08:11 AM

Thank you.
Hoping the Capri uprights are lighter and have better geometry otherwise I haven't any advantages swapping it.

loggyboy - 14/10/13 at 08:18 AM

quote:
Originally posted by sky
Thank you.
Hoping the Capri uprights are lighter and have better geometry otherwise I haven't any advantages swapping it.


I was told my Mel when I ordered mine that the Capri based setup better, and suggested I took that route. Which I have.