I have the following parts open to offers on everything, collection preferred but will post were possible. will sell everything as one for the right price (offers)
Professionally built book Chassis with engine mounts with VIN. Set up for Zetec ST170 and Type 9. In Zinc Primer. The chassis did have panels fitted but these have been removed as they were poorly fitted. Never used £250
Set of front in situ adjustable arms. Powder coated Satin Black £80
Set of rear arms, powder coated Satin Black £80
Pic to follow
Full set of AVO adjustable coilovers and springs used SOLD
Steering column Shortened with UJ and Bearing £40
Sierra Stalks and wiring and connectors with 6" off Wiring , plastic cowls £50
Zetec Exhaust manifold made by Westfield Stainless steel Used £250
exhaust silencer Stainless steel repackable Used Some Damage underneath £100
Ltd slip diff Ratio TBD, painted Black £350
Pair of Modified front uprights hubs and bearings. taper inserts machined and pressed in painted green £75
Rear Uprights powder coated satin black £35
Pics to follow
eccentric Mushrooms £10
5 off TSW wheels 4 with Falken tyres and bolts. Brand new some storage marks no centre caps £200
Pics to follow Rear Hubs/carriers, New bearings and seals, painted Black £100
Rear Drive shafts Pair £40
Nose cone Yellow origin unknown £25
Bonnet Yellow origin unknown £20
New 2.7 Ratio steering rack with track rod ends and extensions £80
Sip 130 migmate, steel liner and wire feed transformer All mods done, with new reg £125
[Edited on 24/11/17 by filstu]
[Edited on 25/11/17 by filstu]
