I need a couple of M12 x 1.25 pitch x 90mm long plated bolts at 8.8 grade and matching nuts. My local supplier wasn't interested, namrick don't do them and eBay has drawn a blank. Any idea where I can get some? Even 1 would get me back on the road.

What are they for? I only ask because I have some 3/8 UNF which will apply much the same clamping force / torque, but will be very slightly smaller in diameter.

suspension link bolts for a Suzuki Cappuccino. 3/8 is too small to replace an M12 in any case but thanks for the offer.

Sorry, I must be gouing senile, I read M10 for M12....

I'll take a look later I've got some M12 Bolts in one of my trays...

I've used these guys for the odd nut/bolt. if they have what you need i could always pop in and send it on

http://www.themontrosegroup.com/Fasteners

These people are brilliant. Have never tried them 'mail order', but face to face they are just so helpful. I don't think there will be a car nut/bolt that they don't do. I got some really weird sizes from them when I was building my Westfield. They are well worth a call/look
http://www.margnor-online.co.uk/

also Annalex Bute near leiester, excellent service.

I have used this ebay supplier before. M12 x 90 METRIC FINE THREAD 1.25 MM HEX 8.8 BOLTS x 4 on eBay (end time 15-Apr-11 10:38:18 BST) .Not really cheap though.

you could try high tensile bolts ltd in worksop or williams fasteners http://www.williamsfasteners.com/

they have a counter just in the shutter door and sell to public and there prices are really cheap. they will have em.
adam





Willenhall Fasteners Ltd
Frederick William Street, Willenhall - 01902 630760